Descargue una muestra del manual del conductor para el Explorer ...

The spare tire and tools for your vehicle are stowed in the following
locations:
Tool
Spare tire
Jack, lug nut wrench, jack handle,
wheel chock
Removing the jack and tools
1. Open liftgate and remove the
carpeted floor lid.
2. Turn jack screw eyelet (1)
counterclockwise to release
pressure.
3. Rotate the locking pin (2)
clockwise until loose then pull out
until it stops and remove the jack
and tool bag from the bracket.
4. Remove the chock and jack tools
from the provided bag rotate the
wrench socket out from the handle.
Roadside Emergencies
Location
Under the vehicle, just in front of
the rear bumper. The spare tire
winch drive nut is located at the
rear center of the cargo area
under a lid.
Behind the rear seat under the
carpeted floor lid in the cargo
floor. The tools are located in a
bag attached to the jack.
265
2007 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)