MANUAL DE USUARIO DE TC-P42X3M(es) - Panasonic

SetupOther function settingsSettings Items Item DescriptionChannel surfmodeAll/Favorite Sets the mode to select the channel with the Channel up/down button.Favorite: Only channels registered as FAVORITE. (p. 18)Language English/Español/ Selects the screen menu language.FrançaisClock Adjusts the clock. (p. 15)ANT/Cable setup See p. 42-43 for more detail.Input labels(Display labelsof connecteddevices)Anti Imageretention(Prevent Imageretention)Selects the terminal and label of the external equipment.Devices connected to external input terminals can be labeled for easier identification during theinput selection. (Input select (p. 21))Terminals: HDMI 1-2/Component/Video/PCLabel: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/OTHER/Not used• You can also enter the label name directly. (Entering characters (p. 19))Pixel orbiter Enable/Disable Enable: Shifts the display image automatically.(Wobbling)4:3 side bars(4:3 mode only)Scrolling barOff/Dark/Mid/BrightNetwork settings See p. 36-38 for more detail.VIERA Link settings See p. 30-31 for more detail.ECO/energysavingNo signal for 10minutes(Stay on/ PowerTV off)No activity for 3hours(Stay on/ PowerTV off)Changes the brightness of the side barThe recommended setting is “Bright” to prevent the panel“Image retention”. (p. 53)Press “OK” to start the horizontal “Scrolling” on the screen.• Press any key except the POWER key to return to previousscreen.• You will return to the previous screen if no key operation hasbeen performed for 15 minutes.[Scrolling bar]To conserve energy, the TV automatically turns off when NO SIGNAL and NOOPERATION continue for more than 10 minutes.• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.• “No signal for 10 minutes was activated” will be displayed for about 10 secondswhen the TV is turned on for the first time after the power was turned off by “Nosignal for 10 minutes”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remainingminutes prior to the shut-off.To conserve energy, the TV automatically turns off when no operation of remote andside panel key continues for more than 3 hours.• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while“PC input” is selected.• “No activity for 3 hours was activated” will be displayed for about 10 seconds whenthe TV is turned on for the first time after the power was turned off by “No activityfor 3 hours”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remainingminutes prior to the shut-off.Keyboard type Select keyboard type. Operate USB keyboard (p. 19)(U.S./Canadian French/Canadian Multilingual Standard/Spanish (LatinAmerica)/Spanish (Spain))Advanced setup Auto power on(No/Yes)Image viewerauto playTurns TV On automatically when the cable box or connected device is turned On.TV AC cord must be plugged into this device. TV turns on every time the power is restored.Slideshow/Photos/Videos/Music/Set later/OffSets the media contents or playback type to play back SDcards automatically.Set later: “Image viewer settings” menu will be displayed repeatedly.“Using Media player” (p. 22)First time setup Restarts the first time setup from “Language” setting. (p. 13)AboutDisplays TV version and software license.Reset to defaultsPerforming Reset will clear all settings made with Setup, such as channel settings.• Password setting/entering (p. 19)48