Sch./ Ref./ Réf./ Typ/ Ref. 1092/600 Mod. 1092

ENGLISHPRECAUTIONS• Make sure that the device is intact after removing it from the package.• Disconnect the device from the mains before cleaning or maintenance. Do not use spray products toclean the device.• Check that the working temperature is within the indicated range and that the environment is notparticularly humid.• Do not touch the dome camera optics surface. Clean the surface with a soft cloth and methylatedspirit in the event of accidental contact.• Disconnect power by means of the circuit breaker in the event of a failure and/or bad operation.• The device can only be opened by qualified technical personnel.• Exclusively contact an authorised service centre for repairs.TECHNICAL SPECIFICATIONSType of sensor:................................................................................................................................1/3” SONYSensitive elements: ..........................................................................................................512(H)x582(V) pixelVideo standard: ......................................................................................................................................... PALResolution:............................................................... Colour 420 TVL - 480TVL (Enhanced *) - B/W500TVLSensitivity: .......................................................... 0.01 Lux F1.2 (B/W mode); 0.005 Lux F1.2 (Sens-up ON)Functions:...........................................................................................................Sens-up, ELC, AGC (AUTO)Optics: ..................................................................................................................................Varifocal 4-9 mmSynchronisation:...................................................................................................................................InternalManual panning speed: ........................................................................................................................ 0~30°/sManual tilting speed:............................................................................................................................. 0~30°/sPreset speed: ........................................................................................................................................... 30°/sNumber of presettings: ..................................................................................................................................32Number of tours:..............................................................................................................................................1Number of track tours (with 1092/620 control panel only):..............................................................................6Protocol: .............................................................................................................................................. Pelco DBaud rate: ..............................................................................................................................2400, 4800, 9600Power: .............................................................................................................................................16Vdc±1VMaximum consumption:........................................................................................................................600 mAWorking temperature:..................................................................................................................... +5 to +40CDimensions (Ø x H): .................................................................................................................. 122 x 193 mmWeight: .................................................................................................................................................... 812 g*: The THERA 3 camera module implements a so-called “Enhanced“ chipset containing multiple processescapable of capturing two different, reciprocally synchronised images in two subsequent instants andgenerate a single image by adding the two. This feature increases the real resolution of the CCD from therated value of 420TVL to a perceived value of 480TVL. Furthermore, it increases image stabilisation.Important note:• The THERA 3 camera module uses DSS (Digital Slow Shutter) technology. DSS settings slow downthe frame frequency and increase camera sensitivity in poor lighting conditions.• Electric, communication and cosmetic features may be subject to change without prior notice.18 DS1092-030A