Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais
Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais
Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BD Audio Setting<br />
DTS<br />
Selects whether to mix or not mix interactive<br />
audio and secondary audio (commentary)<br />
when playing a BD that contains such audio.<br />
Mix<br />
Direct<br />
b<br />
PCM 96 kHz and PCM 192 kHz audio signals are<br />
output as PCM 48 kHz audio signals when “BD<br />
Audio Setting” is set to “Mix.”<br />
Audio ATT<br />
Outputs the audio obtained<br />
by mixing the interactive<br />
audio and secondary audio<br />
to the primary audio.<br />
Lowers the audio output level to prevent<br />
sound distortion.<br />
On<br />
Off<br />
Outputs the primary audio<br />
only.<br />
b<br />
“Audio ATT” does not affect the output from the<br />
HDMI OUT jack and the DIGITAL OUT<br />
(OPTICAL/COAXIAL) jack.<br />
Dolby Digital<br />
Enables Audio Attenuation.<br />
Disables Audio Attenuation.<br />
Selects the audio signals output when playing<br />
Dolby Digital discs.<br />
This setting affects the output from the<br />
DIGITAL OUT (COAXIAL/OPTICAL)<br />
jack.<br />
Downmix<br />
PCM<br />
Dolby Digital<br />
Converts to output Linear<br />
PCM signals. Select this<br />
when connecting an audio<br />
device without a built-in<br />
Dolby Digital decoder.<br />
Select this when connecting<br />
an audio device with a builtin<br />
Dolby Digital decoder.<br />
Selects the audio signals output when playing<br />
DTS discs. This setting affects the output<br />
from the DIGITAL OUT (COAXIAL/<br />
OPTICAL) jack.<br />
Downmix<br />
PCM<br />
DTS<br />
48kHz/96kHz PCM<br />
Converts to output Linear<br />
PCM signals. Select this<br />
when connecting to an audio<br />
device without a built-in<br />
DTS decoder.<br />
Select this when connecting<br />
to an audio device with a<br />
built-in DTS decoder.<br />
Selects the maximum sampling frequency for<br />
the PCM signals output from the DIGITAL<br />
OUT (OPTICAL/COAXIAL) jack.<br />
48kHz/16bit<br />
96kHz/24bit<br />
Outputs audio signals of<br />
96 kHz sampling as 48 kHz/<br />
16 bit.<br />
Outputs audio signals of<br />
96 kHz sampling as 96 kHz/<br />
24 bit. However, the signals<br />
will be output as 48 kHz/<br />
16 bit if the source is copyprotected.<br />
b<br />
• If you select “96kHz/24bit” when an AV<br />
amplifier (receiver) that does not support 96 kHz<br />
is connected, no sound or a loud sound may<br />
result.<br />
• “48kHz/96kHz PCM” is not effective when<br />
“Audio Output Priority” is set to “HDMI” or<br />
“Stereo Analogue.”<br />
Settings and Adjustments<br />
,continued<br />
51
Change language