Views
7 months ago

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Resetting You can reset

Resetting You can reset the player settings to the factory default by selecting the group of settings. All the settings within the group will be reset. 1 Select “Resetting,” and press ENTER. 2 Select “Reset to Factory Default Settings,” and press ENTER. 3 Select the settings you want to reset to default, and press ENTER. The display asks for confirmation. You can reset the following settings: – Video Settings – Audio Settings – BD/DVD Viewing Settings – Photo Settings – System Settings – Network Settings – All Settings 4 Select “Start” using

Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power Additional Information The power does not turn on. , Check that the mains lead is connected securely. , It takes a short while before the player turns on. The message “A new software version has been found on the network. Perform update under "Network Update."” appears on the screen when turning the player on. , See “Network Update” (page 46) to update the player to a newer software version. Disc Additional Information The disc does not play. , The disc is dirty. , The disc is upside down. Insert the disc with the playback side facing down. , The disc is skewed. , You are attempting to play a disc with a format that cannot be played back by this player (page 70). , The region code on the BD or DVD does not match the player. , The player cannot play a recorded disc that is not correctly finalised (page 70). Picture See also “Connecting to an HDMI jack” (page 17) when connecting equipment using the HDMI cable. There is no picture/picture noise appears. , Check that all the connecting cables are securely connected. ,continued 63