Samsung DIGIMAX A503 - User Manual_6.42 MB, pdf, ENGLISH
Samsung DIGIMAX A503 - User Manual_6.42 MB, pdf, ENGLISH
Samsung DIGIMAX A503 - User Manual_6.42 MB, pdf, ENGLISH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connecting to a Power Source<br />
■You can use batteries only to provide the camera with power.<br />
● We recommend using batteries for a digital camera (Within a year from the date<br />
of manufacture). The batteries are listed below.<br />
- Non rechargeable batteries : 2 X AA Alkaline (High Capacity)<br />
CR-V3 type - Lithium Ion battery<br />
- Rechargeable batteries : 2 X AA Ni-MH (SNB-2512)<br />
● It is easy to buy alkaline batteries. However, the duration for using batteries<br />
varies in accordance with the battery manufacturer or the photographic<br />
conditions.<br />
INFORMATION<br />
Important information about battery usage<br />
● When the camera is not used, turn off the camera power.<br />
● Do not recharge the non rechargeable batteries. It may cause an explosion.<br />
● Please remove the batteries if the camera will not be used for long periods.<br />
Batteries can lose power over time and are prone to leaking if kept inside<br />
the camera.<br />
● We recommend high capacity batteries (listed above) as manganese<br />
batteries cannot deliver sufficient power.<br />
● Low temperatures (below 0°C) can affect the performance of the batteries<br />
and you may experience reduced battery life. Batteries will usually recover<br />
at normal temperatures.<br />
● Do not use old and new batteries at the same time. Do not mix battery<br />
brands, type or an old battery with a new one.<br />
● During extended use of the camera, the camera body may become warm.<br />
This is perfectly normal.<br />
■Insert the battery as shown<br />
- If the camera does not turn on after<br />
you have inserted battery, please<br />
check whether the battery are<br />
inserted with the correct polarity (+/-).<br />
- When the battery chamber cover is<br />
opened, do not press the battery<br />
chamber cover by unnecessary force.<br />
This may cause the battery chamber<br />
cover modification or breakage.<br />
■ There are 3 indicators for battery condition that are displayed on the LCD monitor.<br />
Battery indicator<br />
Battery status<br />
The battery is fully<br />
charged<br />
Low battery capacity<br />
(Prepare to recharge<br />
or use spare battery)<br />
Inserting the memory card<br />
■ Insert the memory card as shown.<br />
- Turn off the camera's power before inserting the<br />
memory card.<br />
- Have the front of the memory card facing toward the<br />
front of the camera (lens) and the card pins toward the<br />
back of the camera (LCD monitor).<br />
- Do not insert the memory card the wrong way round.<br />
Doing so may damage the memory card slot.<br />
Low battery capacity<br />
(Prepare to recharge<br />
or use spare battery)<br />
《8》