G&D DVIMUX8-OSD-USB - Guntermann und Drunck GmbH

Configuring the system
Configuration
Only the Supervisor or (apart from resetting the default configuration) users with configuration
rights can view and edit the system settings of the KVM switch.
The following settings are active in the default setting of the KVM switch:
SYSTEM CONFIG DVIMUX8
Hotkey: Ctrl
Double Hotkey: No
OSD via 2x Keypress: No
Select Keys: 0..9
Cascade Setup ...
USB Keyboard Mode ...
Video Config ...
PS/2 Keyboard Type ...
Set System Defaults ...
Esc Enter F1:Save
Changing hotkeys or double hotkeys
NOTE: The single hotkey Ctrl is preset at default.
If you want to use a key combination consisting of two hotkeys, you can enable the
usage of double hotkeys (see page 41).
Press the hotkey and Num to open the On-Screen Display of the KVM switch. You
can access a computer by pressing the hotkey and one of the select keys (see
page 12).
If an application program or another G&D device uses the same double hotkey
within the cascade, you can change the hotkey in the settings of the KVM switch.
NOTE: In addition to using the defined hotkey or double hotkey, you can open the
on-screen display by pressing the Ctrl or the Print Screen key twice (see page 42).
How to change current hotkeys or double hotkeys:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to select System Config, and press Enter.
4. Use the Arrow keys to select Hotkey, and press Space to select one of the following
options.
G&D DVIMUX8-OSD-USB · 40