G&D DVIMUX8-OSD-USB - Guntermann und Drunck GmbH

Defining signals types of video channels
Configuration
Computers that provide digital or analog video signals can be connected to the KVM
switch. The signal type (digital or analog) that is transmitted from computer to
KVM switch is displayed unaltered on the connected monitor.
If the video signal of the connected computer cannot be detected reliably, you can
define the signal types in the On-Screen Display (OSD).
How to select the signal type of video channels:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to select System Config, and press Enter.
4. Use the Arrow keys to select Video Config, and press Enter.
VIDEO CONFIG DVIMUX8
Channel V1 V2
CPU 1 U U
CPU 2 U U
CPU 3 U U
CPU 4 U U
CPU 5 U U
CPU 6 U U
CPU 7 U U
CPU 8 U U
Enter Space:Change
5. Use the Arrow and Arrow keys to select the channel.
6. For multi-channel devices, select the video channel (V1 to V2) with the Arrow
and Arrow keys.
7. Press Space repeatedly to switch between signals types:
A Transmission of analog video signals
D Transmission of digital video signals
U Auto recognition and transmission of analog and digital video signals
8. Repeat steps 5 through 7 to change the signal type of another video channel.
9. Leave the menu by pressing Enter.
10.Press F1 to save your settings.
G&D DVIMUX8-OSD-USB · 46