G&D DVIMUX8-OSD-USB - Guntermann und Drunck GmbH

Opening the on-screen display by pressing a key twice
Configuration
Instead of using Hotkey+Num or Double hotkey+Num to open the on-screen display
(OSD), you can also adjust the settings in the KVM switch to open the OSD by pressing
Ctrl or Print twice.
How to enable/disable opening the on-screen display by pressing a key twice:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the Function menu.
3. Use the Arrow keys to select System Config and press Enter.
4. Use the Arrow keys to select OSD via 2x Keypress and press Space to choose between
one of the following options:
No: You can only open the OSD by pressing Hotkey+Num
(default: Ctrl+Num).
Ctrl: You can only open the OSD by pressing Ctrl twice.
Print: You can only open the OSD by pressing Print twice.
Press F1 to save your settings.
Changing select keys
The default configuration provides the select keys 1 to 8 to access the computers
connected to the KVM switch.
For example, access Computer 4 by pressing Hotkey+4 (standard: Ctrl+4) in the
default configuration. You can adjust the select keys to your needs.
How to select a different set of select keys:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to select System Config, and press Enter.
4. Use the Arrow keys to select Select Keys, and press Space to select one of the following
options:
0 ... 9: Enable select keys 0 to 9
NUM 0 ... 9 Enable select keys NUM 0 to NUM 9
A ... K: Enable select keys A to K
F1 ... F10: Enable select keys F1 to F10
5. Press F1 to save your settings.
Further information:
Defining select keys on page 29
G&D DVIMUX8-OSD-USB · 42