G&D DVIMUX8-OSD-USB - Guntermann und Drunck GmbH

Resetting the default configuration of user accounts
User management
You can use this function to reset the default configuration of user accounts.
NOTE: Username and password are not reset.
How to reset the default configuration of a user account:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to select User Account and press Enter.
4. Select the user account you want to edit and press Enter.
5. Use the Arrow keys to select Set Account Defaults and press Enter.
6. Press F1 to save your settings.
Assigning configuration rights
NOTE: The Supervisor account is always provided with configuration rights.
In the default configuration, only the Supervisor can administrate user accounts, view
and change system settings, or rename computers.
If you want to assign these rights to another user, you can change the settings in the
user account.
IMPORTANT: Only the Supervisor can reset the default configuration or change the
scancode sets and the configuration of the Supervisor account.
How to assign or deny configuration rights to user accounts:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the Arrow keys to select User Account and press Enter.
4. Select the user account you want to edit and press Enter.
5. Use the Arrow keys to select Config Right and press Space to choose one of the following
options:
Yes: Allow viewing and changing the configuration
No: Deny viewing and changing the configuration
6. Press F1 to save your settings.
G&D DVIMUX8-OSD-USB · 26