operator's manual wireless dosimetry system - Best Medical Canada

OPERATOR'S MANUAL FOR THE SYSTEM
5.1.1 Reader Side Panel Layout
The side panel contains the status LEDs. The following paragraphs describe these
items in detail.
Figure 5-2: Model TN-RD-70-W Side Panel
5.1.2 Switches and LEDs
The “POWER” SWITCH –has three states (OFF, ON, INITIALIZE
BATTERY/MOMENTARY). The INITIALIZE position is a temporary position used to
reconnect the battery if the unit battery has been completely drained. To INITIALIZE
the Reader, depress the switch to the ON position.
When using the unit, ensure that the mobileMOSFET is in the ON state and the
green LED is flashing. The ON position is with the switch depressed to I, and the
OFF position is with the switch depressed to O (please see Figure 5-3: Model TN-
RD-70-W Back Panel).
1
2
3
4
1
2
The “WIRELESS” LED – is a blue indicator that signals if the
mobileMOSFET Reader is currently connected to a PC via a wireless
transmitter.
The “POWER” LED – is also a green indicator that signals that the
unit is turned on.
The “TRICKLE” LED – is a green indicator that the unit is currently in
trickle charge.
The “FAST” LED – is a red indicator that signals the unit is currently in
a fast charge.
Page 42 of 62
3
4