operator's manual wireless dosimetry system - Best Medical Canada

OPERATOR'S MANUAL FOR THE SYSTEM
1 GENERAL INFORMATION
1.1 THIS MANUAL
The information in this manual is provided in eight sections and is intended for use
with mobileMOSFET Software Versions 2.2 and above. After a general introduction,
the instructions are laid out in the order of operation, with SYSTEM DESCRIPTION
and SYSTEM SET-UP instructions followed by OPERATING PROCEDURE. This is
followed by reference sections describing the System Components, Calibration and
other key information.
1.2 LABELING
The following table defines the labeling symbols that may be found on certain
mobileMOSFET system components and/or documentation.
Manufacturer
Date of manufacture (with date format of YYYY-MM)
Authorized Representative for the European Union
Consult Instructions
SN Serial Number
1.3 INTRODUCTION
mobileMOSFET, model TN-RD-70-W, is Best Medical Canada Ltd's mobile, battery
operated dose verification system intended for use in applications such as External
Beam and Brachytherapy radiotherapy to verify treatment planning, and Radiology to
measure dose uniformity and radiation exposure to the patient.
The System consists of PC-based user-interface software and one or more
mobileMOSFET Reader Modules. The Reader Module is small, lightweight, and
battery-operated. It hosts the MOSFET dosimeters and realizes the measurement
circuitry. The Software provides a console on screen for the operator to perform all
required actions in dose measurements, such as reading, displaying, saving and
printing results.
The mobileMOSFET Remote Monitoring Dose Verification Software can be used to
perform five treatment sessions simultaneously and each session can read up to eight
readers. Note: Throughout this Manual, the term "Reader" refers to the
mobileMOSFET Reader Module.
Page 8 of 62