Technical Documentation Pressure Independent Characterized ...

PICCV Running Times
All MFT actuators have constant running time of 100 seconds. Whether they are set for on/off, floating
or proportional control, the running time remains constant.
Note for Floating Point Control with LRB24-3: These actuators have a constant running time. The running
time is dependent on the model number or FlowSetR position as indicated in the table below.
Some DDC controllers need an adjustment of the running time, otherwise they lose the position information.
In any case, we recommend a position reset once a day.
Running Time (sec.) Running Time (sec.)
Model # Flow Rate LRX24-MFT, ARX24-MFT
Valve (GPM) LRB24-3 TF24-MFT US, LF24-MFT US, AF24-MFT US
PICCV-15-0.50 (-PT) 0.5 36 100
PICCV-15-001 (-PT) 1 60 100
PICCV-15-1.50 (-PT) 1.5 45 100
PICCV-15-002 (-PT) 2 51 100
PICCV-15-003 (-PT) 3 56 100
PICCV-15-004 (-PT) 4 63 100
PICCV-15-005 (-PT) 5 68 100
PICCV-20-006 (-PT) 6 61 100
PICCV-20-007 (-PT) 7 64 100
PICCV-20-008 (-PT) 8 67 100
PICCV-20-009 (-PT) 9 69 100
PICCV-20-010 (-PT) 10 76 100
PICCV-25-012 (-PT) 12 62 100
PICCV-25-014 (-PT) 14 67 100
PICCV-25-016 (-PT) 16 86 100
PICCV-25-018 (-PT) 18 67 100
PICCV-32-018-PT 18 na 100
PICCV-32-020-PT 20 na 100
PICCV-32-022-PT 22 na 100
PICCV-32-024-PT 24 na 100
PICCV-32-026-PT 26 na 100
PICCV-40-026-PT 26 na 100
PICCV-40-028-PT 28 na 100
PICCV-40-030-PT 30 na 100
PICCV-40-033-PT 33 na 100
PICCV-50-033-PT 33 na 100
PICCV-50-036-PT 36 na 100
PICCV-50-040-PT 40 na 100
PICCV-50-044-PT 44 na 100
PICCV-50-048-PT 48 na 100
PICCV-50-052-PT 52 na 100
PICCV-50-056-PT 56 na 100
PICCV-50-060-PT 60 na 100
PICCV-50-065-PT 65 na 100
PICCV-50-070-PT 70 na 100
PICCV-50-075-PT 75 na 100
PICCV-50-080-PT 80 na 100
PICCV-50-090-PT 90 na 100
PICCV-50-100-PT 100 na 100
54
®
J20728 - 04/07 - Subject to change. © Belimo Aircontrols (USA), Inc.