9362576b, Operating Manual Twin-DVR Sat Receiver ... - Kathrein
9362576b, Operating Manual Twin-DVR Sat Receiver ... - Kathrein
9362576b, Operating Manual Twin-DVR Sat Receiver ... - Kathrein
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Software and Programme List Update<br />
After the “Display Info”<br />
request an on-screen<br />
display appears which you<br />
should use as a guide.<br />
Pay attention to all<br />
on-screen displays!<br />
Following a software<br />
update you must reset<br />
Winter/Summer time as<br />
appropriate!<br />
You can also download<br />
the updates from the<br />
Internet, at:<br />
http://www.kathrein.de/<br />
esc-kathrein/englisch/<br />
download/ufd/<br />
firmware_ufd580.cfm<br />
You can move the light-coloured cursor bar using the and or<br />
buttons to select the item you want to deactivate (No). Items that<br />
are already inactive cannot be changed. If you only want to update the<br />
software but leave your channel list alone, deselect the “Channel List”<br />
field, or vice versa. You can also request “Info Text” only.<br />
To update, move the cursor bar to “Start” and confirm with . The<br />
receiver then begins the update and displays the following message<br />
where applicable:<br />
Once the update is complete, the receiver is re-initialised and starts<br />
operation again. In case of an error or no signal, the message<br />
“Download failed” appears.<br />
Never turn off the receiver during the update process, as otherwise<br />
you could lose the entire software. If this happened, the receiver<br />
would have to be re-installed at the factory or using a PC and zeromodem<br />
cable. During the download “Please wait” flashes on-screen.<br />
85