Download PDF: AKVIS NatureArt

Density = 5 Density = 15
¡ Length. This parameter defines the degree to which drops are lengthened. It also acts as a
constraint on length. The length of drops may be different, but their length will not exceed the
specified value.
Length = 10 Length = 40
¡ Scale. This parameter affects the size of raindrops. If Length is changed the raindrops will only
change in length, but changing this parameter affects the size of raindrops in all geometric
directions. The higher the value, the larger the raindrops.
Scale = 1 Scale = 3
AKVIS NatureArt
¡ Angle. This parameter determines the direction of falling raindrops and leads to the creation of
another effect - wind. If the value is equal 90, rain falls vertically (no wind). At values less than
90 the rain falls at a right angle (wind is blowing from right to left). At values higher than 90 it
26 / 90