Download PDF: AKVIS NatureArt

Direction = 60 Direction = 120
¡ Dispersal. This parameter determines the difference between the direction of waves. When the
value is set to 0, all waves follow the same direction. As the value increases, individual waves
deviate from the direction specified by Direction. The higher the value, the greater the
deviation.
Dispersal = 20 Dispersal = 80
¡ Depth. By adjusting this parameter you can change the visual perception of the water's depth.
The higher the value, the darker the water and the greater its depth.
Depth = 20 Depth = 60
AKVIS NatureArt
¡ Ripples. This parameter adds an additional relief effect to the waves and determines the degree
to the effect. The higher the value, the more ribbed and embossed the waves will be.
36 / 90