Threads and Threading - Sportpilot.info
Threads and Threading - Sportpilot.info
Threads and Threading - Sportpilot.info
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1852 ANSI BUTTRESS THREADS<br />
H h n h<br />
Form of American National St<strong>and</strong>ard 7°/45° Buttress Thread<br />
with 0.6p Basic Height of Thread Engagement<br />
.5h<br />
.5h<br />
r<br />
;;;;;;<br />
;;;;;;<br />
;;;;;; ;;;;;;<br />
.5G<br />
he .5h F 7°<br />
h s<br />
(Basic) Pitch Dia. (E)<br />
Min Pitch Dia. of Internal Thread<br />
Max Pitch Dia. of External Thread<br />
Nominal (Basic) Major Dia. (D)<br />
H h n h<br />
.5h<br />
.5h<br />
;;;;;;<br />
;;;;;;<br />
r<br />
Fig. 2b. Flat Root External Thread<br />
Heavy Line Indicates Basic Form<br />
s<br />
Internal Thread<br />
s<br />
erance. However, the root truncation from a sharp V should not be greater than 0.0826p nor<br />
less than 0.0413p.<br />
Lead <strong>and</strong> Flank Angle Deviations for Class 2: The deviations in lead <strong>and</strong> flank angles<br />
may consume the entire tolerance zone between maximum <strong>and</strong> minimum material product<br />
limits given in Table 4.<br />
Diameter Equivalents for Variations in Lead <strong>and</strong> Flank Angles for Class 3: The combined<br />
diameter equivalents of variations in lead (including helix deviations), <strong>and</strong> flank<br />
f<br />
p<br />
.5G<br />
90°<br />
Fig. 2a. Round Root External Thread<br />
Heavy Line Indicates Basic Form<br />
Internal Thread<br />
p<br />
Max Corner Rounding = r<br />
s<br />
f .5G s<br />
h e<br />
F<br />
f<br />
45°<br />
0.020p<br />
radius<br />
approx.<br />
(Optional)<br />
Minor Dia. of External Thread<br />
Minor Dia. of Internal Thread<br />
(Basic) Minor Dia. (K)<br />
Major Dia. of External Thread<br />
;;;;;;<br />
;;;;;;<br />
;;;;;; ;;;;;; .5G<br />
h s<br />
.5h<br />
Max Corner Rounding = r<br />
(Basic) Pitch Dia. (E)<br />
Min Pitch Dia. of Internal Thread<br />
Max Pitch Dia. of External Thread<br />
Nominal (Basic) Major Dia. (D)<br />
Machinery's H<strong>and</strong>book 27th Edition<br />
;;;;;;<br />
;;;;;;<br />
s<br />
F 7° 45°<br />
s<br />
F<br />
f<br />
S<br />
0.020p<br />
Radius<br />
Approx.<br />
(Optional)<br />
(Basic) Minor<br />
S Dia. (K)<br />
Minor Dia. of External Thread<br />
Minor Dia. of Internal Thread<br />
Major Dia. of External Thread<br />
Copyright 2004, Industrial Press, Inc., New York, NY