H-1100 - Smiths Medical
H-1100 - Smiths Medical
H-1100 - Smiths Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 5<br />
S E C T I O N 5 • O u t o f t h e B o x - A s s e m b l y<br />
Out of the Box-Assembly<br />
This device must be assembled and tested by authorized <strong>Smiths</strong> <strong>Medical</strong><br />
personnel, an authorized distributor of <strong>Smiths</strong> <strong>Medical</strong>, or a qualified<br />
person authorized by the institution prior to placing the device into<br />
service.<br />
The following steps describe how to assemble and do preliminary setup of<br />
the Level 1 ® NORMOFLO ® H-<strong>1100</strong> Irrigation Fluid Warmer (Fluid<br />
Warmer).<br />
Step 1 Verify components of the Fluid Warmer<br />
Step 2 Assemble Fluid Warmer to Base<br />
Step 3 Attach the Fluid Bag Hanger<br />
Step 4 Disinfect the Recirculating Solution Reservoir<br />
Step 5 Preparation for Use<br />
Step 6 Perform Electrical Safety Tests<br />
Read through the instructions completely prior to setting up the device.<br />
Note: After unpacking the system, recycle packaging material according to<br />
hospital policy for recyclable materials.<br />
Level 1 ® NORMOFLO ® H-<strong>1100</strong> Irrigation Fluid Warmer | Operator’s Manual 7