H-1100 - Smiths Medical

Electromagnetic Environmental Recommendations
Level 1 ® NORMOFLO ® Irrigation Warming Sets
(Disposable Sets)
Disposable Set Accessories
46 Level 1 ® NORMOFLO ® H-1100 Irrigation Fluid Warmer | Operator’s Manual
S E C T I O N 1 5 • S p e c i f i c a t i o n s
Recommended separation distances between portable and mobile RF communications equipment and
the Level 1 ® NORMOFLO ® H-1100 Irrigation Fluid Warmer
The Level 1 ® NORMOFLO ® H-1100 Irrigation Fluid Warmer is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of the Fluid Warmer can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the Fluid Warmer as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum
Separation distance according to frequency of transmitter m
output power of 150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
transmitter
d=[3.5/V1]√P
d=[3.5/E1]√P
d=[7/E1]√P
W
0.01 0.116 0.116 0.233
0.1 0.368 0.368 0.737
1 1.16 1.16 2.33
10 3.69 3.69 7.38
100 11.66 11.66 23.33
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 1 The guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
IR-40
Product Description
Normothermic Irrigating Set
IR-500 Normothermic Irrigating Set
IR-600 Normothermic Irrigating Set
IRI-600 Normothermic Irrigating Set
IRI-600B Normothermic Irrigating Set
IR-700 Normothermic Irrigating Set with vented spikes for use with
rigid plastic containers
Product Description
IR-6 2-spike adapter to convert IR/IRI series disposables to a
4-spike configuration
IR-7 2-spike adapter to convert IR/IRI series disposables to a
4-spike configuration - for use with rigid plastic containers