StringPin Pinsetter Service Manual - Brunswick

More documents

Recommendations

Info

Pins Up Control Switch (Pins Up Switch in on Position) The machine will lift the pins to the full up position. At this time, the magnet in the cam control box will actuate the pins up control switch and stop the machine. Refer to Figure 3-3. Figure 3-3. Pins Up Position 1 PINSETTER 2 CAM CONTROL BOX 3 PINS UP CONTROL SwITCH (ONLY ADJUSTABLE wITH GEAR) 4 MAGNET 12 StringPin Pinsetter Service Manual
String Brake Switch The string brake switch holds the pins knocked over from the first ball of a standing pin cycle, in the up position. After the string wagon has passed the up position, the magnet in the cam box activates the string brake switch which tells the string control unit to keep the knocked over pins in the up position. Refer to Figure 3-4. Figure 3-4. String Brake Switch 1 PINSETTER 2 CAM CONTROL BOX 3 MAGNET 4 STRING BRAKE SwITCH (FOR THE SECOND BALL FRAME) StringPin Pinsetter Service Manual 13
Page 1 and 2: Service Manual StringPin Pinsetter
Page 3 and 4: ConTenTS Section 1 - SAFETY! ......
Page 5 and 6: noTeS & WarningS Section 1 - SAFETY
Page 7 and 8: CenTer MeChaniC Center Mechanics ar
Page 9 and 10: PinSeTTer iS ready for BoWling Figu
Page 11: PinSeTTer SWiTCh fUnCTionS disentan
Page 15 and 16: String Control Unit (Spic) The stri
Page 17 and 18: STring BraKe adjUSTMenTS 1. With th
Page 19 and 20: Pin SloW SeTTing adjUSTMenTS 1. Tur
Page 21 and 22: fallen Pin deTeCTion adjUSTMenT The
Page 23 and 24: 3. Thread the string through the he
Page 25 and 26: 8. Wind the extra string onto the s
Page 27 and 28: quarterly (3 Month) - Apply grease
Page 29 and 30: - Apply a drop of oil on each side
Page 31 and 32: Section 6 - Troubleshooting SolUTio
Page 33 and 34: Section 7 - Cable Routing and Conne
Page 35 and 36: Figure7-1. Odd Lane Electrical Cont
Page 37 and 38: StringPin Pinsetter Figure 7-3. Bal
Page 39 and 40: Figure 7-5. Ball Detect StringPin P
Page 41 and 42: Figure 7-7. Motor StringPin Pinsett
Page 43 and 44: PCB Components and Connections Stri
Page 45 and 46: (21) Main Power - Input power conne
Page 47 and 48: (9) Seileinzug - A push button is c
Page 49 and 50: Figure 7-12. Overview of Buttons on
Page 51 and 52: Figure 7-15. Route Interface Cable
Page 53 and 54: 3. Center the ball detect assembly
Page 55 and 56: SES String Machine Figure 7-21. “
Page 57 and 58: Figure 7-23 StringPin Pinsetter Ser
Page 59 and 60: The following is a description of t
Page 61 and 62: (37) LED D35-D44 - Used to indicate
Page 63 and 64:
Scanner Data - Cable Assembly (P/N
Page 65:
On/Off Reset - Cable Assembly (P/N
show all

StringPin Pinsetter Service Manual - Brunswick

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?