StringPin Pinsetter Service Manual - Brunswick
StringPin Pinsetter Service Manual - Brunswick
StringPin Pinsetter Service Manual - Brunswick
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Figure 7-13. Route Reset Control Cable<br />
4. Splice the Reset Control cable (57-500927-000) to the Ball Rack Reset Buttons cable<br />
(55-083121-000). Refer to Figure 7-13.<br />
NOTE: Differences between “P4” and “P2” reference “Troubleshooting” section,<br />
items #6 and #8 for further explanation when connecting this cable.<br />
Figure 7-14. Splice Ball Rack Reset Cable<br />
Interface Cable Installation<br />
1. Route the String <strong>Pinsetter</strong> Interface cable (P/N 57-500281-000) from “P8” on the string<br />
pinsetter interface to the appropriate <strong>Pinsetter</strong> Control connection on the scoring computer.<br />
Refer to Figure 7-15.<br />
50 <strong>StringPin</strong> <strong>Pinsetter</strong> <strong>Service</strong> <strong>Manual</strong>
Change language