StringPin Pinsetter Service Manual - Brunswick
StringPin Pinsetter Service Manual - Brunswick
StringPin Pinsetter Service Manual - Brunswick
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pin SloW SeTTing adjUSTMenTS<br />
1. Turn the pinsetter power on. Knock down some pins. When the string wagon travels to the<br />
rear of the string pinsetter, turn off the pinsetter power<br />
2. With the pinsetter power off, lock out the power<br />
3. The pins will travel to the pindeck by gravity<br />
Warning! <strong>Pinsetter</strong> power is to remain off while performing any manual function.<br />
4. <strong>Manual</strong>ly rotate the large drive pulley in reverse, raising the pins until the string wagon lever<br />
roller starts to touch the pin slow setting cam.<br />
5. Lock the large drive pulley at this position<br />
6. Measure the distance the bottom of pins 1, 2, and 3 are from the pin deck. The distance should<br />
be 60mm +-20mm. Measure the distance the bottom of pins 4 – 10 are from the pin deck. The<br />
distance should be 80mm +- 20mm<br />
<strong>StringPin</strong> <strong>Pinsetter</strong> <strong>Service</strong> <strong>Manual</strong> 19