shop main D-2011 - Moto-Services

SHOP EQUIP & TOOLS
HARD PARTS
CARB & FUEL
IGNITION/ELECTRICAL
CONTROL
SUSPENSION
ACCESSORIES
100
DS SALES FLYWHEEL & ROTOR PULLERS, T-HANDLE WRENCHES
HODAKA
35-5931 MP#1 27mm x 1.0mm LH Internal
Most early models such as: Ace-90, Ace-100/B
Model 93 Super Rat (100cc/mx), Dirt Squirt (100cc)
Wombat (125cc) Combat Wombat (125cc/mx)
HUSABERG
35-5952 MP#29 35mm x 1.5mm RH External
Most 4-stk 400, 501, & 600cc Off-Road models.
35-5956 MP#46 26mm x 1.0mm RH External
Most FE450 & FE650 4-strokes
HUSQVARNA
35-6385 MP#2 33mm x 1.0mm RH Internal
Fits most 1960-1970 models with Point Ignition
(FEMSA, BOSCH, MOTOPLAT)
35-6651 MP#3 27mm x 1.25mm RH Internal
Fits most 1970-1980 2-stroke models with
C.D.I. Ignition
(FEMSA, BOSCH, MOTOPLAT)
35-5944 MP#11 22mm x 1.5mm RH Internal
Most 1990 to present WX series 2-strokes
35-5946 MP#12 26mm x 1.5mm External
Most Late 2-strokes with C.D.I. Ignitions
(FEMSA, BOSCH, MOTOPLAT)
35-5952 MP#29 35mm x 1.5mm RH External
Most 4-stk 400, 501, & 600cc Off-Road models
35-5956 MP#46 26mm x 1.0mm RH External
Most 250,450, & 510 4-stroke TE,TC,SM, & SMR
KTM
35-6651 MP#3 27mm x 1.25mm RH Internal
Fits most current 2-stroke liquid cooled models
(FEMSA, BOSCH, MOTOPLAT)
35-5946 MP#12 26mm x 1.5mm External
KTM Enduro/Offroad/MX two-stroke
125/250/300/360 cc
(FEMSA, BOSCH, MOTOPLAT)
MOTION PRO T-HANDLE, BALL-END ALLEN SET
T-Handle hex loosens/
tightens stubborn fasteners
quickly Ball End gives
better access to recessed allens,
up to 25 degree angle T’s are 6 3/4”
long , and are made of chrome
vanadium tool steel.
35-2478 Motion Pro T-Handle, Ball-End Allen Set.
MOTION PRO RACER T-HANDLE DEEP SOCKET SET
Set includes the following: 8mm, 10mm, 12mm, and 14mm sockets,
and #2 & #3 phillips screwdrivers.
35-9762 Motion Pro Racer T-Handle Deep Socket Set
KTM
35-5956 MP#46 26mm x 1.0mm RH External
KTM Enduro/Dual Sport four-stroke 400cc
through 620cc (1988 through 1996)
35-8604 MP#50 19mm x 1.0mm RH External
Most SX & SR Mini Racers
LEM, and ITALJET
35-8604 MP#50 19mm x 1.0mm RH External
Pee-Wee racer 50cc applications.
35-4264 MP#64 33mm x 1.5mm Internal
Most Electric Start Singles, including 620, 625,
640, 660, 690cc and LC4E 4-strokes
ATK/ROTAX
35-5952 MP#29 35mm x 1.5mm RH External
All 600cc with large flywheel
35-6769 MP#4 30mm x 1.5mm RH Internal
Fits most models
35-5946 MP#12 26mm x 1.5mm External
Fits most models
UNIVERSAL
35-5953 TOOL#37 Special 12 hole Disc with
6 & 8mm bolts supplied. Removes flywheel and
electric starter magneto from the crank shaft.
Works on P.W.C. , ATV, and motorcycle apps.
SCOOTER
35-5931 MP#1 27mm x 1.0mm LH Internal
Most import scooters with 125-150cc GY6
4-stroke engines
35-6008 MP#43 24mm x 1.0mm RH External
Most Asian & European Imports scooter
models with GY6QMB139 engines
35-7728 MP#16 26mm x 1.0mm RH Internal
Most 60’s-70’s Vespa 125 and 150 cc scooters
SCOOTER
35-5956 MP#46 26mm x 1.0mm RH External
Clutch Puller for most small frame Vespas
35-4264 MP#64 33mm x 1.5mm Internal
Honda CN250 Helix Scooters
35-3479 MP#73 28mm x 1mm RH External
Most Import scooters with 125-200cc GY6B
4-stroke engines
CLASSIC - VINTAGE
35-6385 MP#2 33mm x 1.0mm RH Internal
Fits most Bultaco, Ossa, Montessa, Husky,
Penton, Sachs, Puch, and Zundap models with
Point/Condensor or C.D.I.Ignition
(FEMSA, BOSCH, MOTOPLAT)
35-6651 MP#3 27mm x 1.25mm RH Internal
Fits most Bultaco, Ossa, Montessa, Husky,
Penton, Sachs, and Maico models with
Point/Condensor or C.D.I. Ignition
(FEMSA, BOSCH, MOTOPLAT)
35-6769 MP#4 30mm x 1.5mm RH Internal
Fits most Penton, Sachs, Ossa, Maico, Zundap
Puch and European Mini bikes.
(FEMSA, BOSCH, MOTOPLAT)
Puller listings begin on page 99
MOTION PRO THREE WAY
SCREWDRIVER
Blade sizes include 16mm (5/8"), 22mm
(7/8") and 33mm (1 1/2"). Seven (7") inch
width gives
lots of leverage for
tough to turn screws.
35-2989 Motion Pro
Three Way
Screwdriver
MOTION PRO 1/4” & 3/8” DRIVE
T-HANDLES
These two T-Handle Socket Drivers allow
optional ways to use any 1/4” or 3/8”
sockets, hex drives, crows’ foot or swivels.
Manufactured from chrome-vanadium
tool steel with carbon steel. Sold each.
35-8804 Motion Pro 1/4” Drive (8-1/2” Long)
35-8808 Motion Pro 3/8” Drive (10-1/2” Long)
METRIC
T-HANDLE SOCKETS
Made in Japan.
Limited one year warranty.
35-5130 Metric T-Handle Set.
35-9580 8mm
35-9582 10mm
35-9583 12mm
35-9584 14mm
35-9585 17mm
35-5130