shop main D-2011 - Moto-Services

18-4171
18-4170
YAMAHA Dual Sport/Offroad
18-4171 498-24500-01-00, 438-24500-01-00 (tap lever included)
214-24500-02-00
DT100A/B 74-75
AT1B/AT1MB125 69-70
AT1C/AT1MX-125 1971
AT2 Enduro, AT2MX-125 72-73
DT125A/B Enduro 74-75
CT1/CT1B/CT1C/CT2/CT3-175 Enduro 69-73
DT175A/B 74-75
IT1750D/E 77-78
DT1 Enduro 68-71
DT2/DT3-250 72-76
DT250A/B/C Enduro 72-76
IT250D/E 77-78
DT360A Enduro 1974
RT1 360 Enduro, Offroad 70-73
DT/IT 400B/C 75-78
XT500C/D/E/F/G/H Dual Sport 76-81
18-4173 2K5-24500-00-00 (tap lever included)
YZ80G/H/J/K/L/N 80-85
YZ100E/F/G/H/J/K 78-83
YZ125E/F/G/H/J/K/L/N 78-85
YZ250D/E/F/G/H/J/K/L/N 77-85
YZ400D/E/F 77-79
YZ465G/H 80-81
YZ490J/K/L/N 82-85
18-4174 26H-24500-00-00 (tap lever not included)
FZX700S/SC/T/TC 86-87
FZ750N/S/SC 85-86
FZ750U/UC 1988
FJ1200 89-93
XVZ12TK Venture, Venture Royal 1983
FZR1000 90-95
18-4175 447-24510-02-00 RH side only (tap lever included)
TX500/A 73-74
XS500B/C/D 75-77
XS1/XS1B/XS2-650 70-72
TX650/A 73-74
XS650B/C/D 75-77
TX750/A 73-74
YAMAHA Dual Sport/Offroad
18-4993 18-4998
18-4170 367-24500-04-00 (tap lever included)
JT1/JT2MX-60 Offroad 71-72
JT1/JT2-60 Mini Enduro 71-72
DT80H/J/K Dual Sport 81-83
GT1-80 Dual Sport 1973
GT80A/B/C Dual Sport 74-76
GT80E/F/G Dual Sport 78-80
GTMX/GTMXA/GTMXB/GTMXC-80 73-76
GTMXD/GTMXE/GTMXF-80 77-79
MX80G/H/J 81-83
YZ80D/E/F 77-79
DT100D/E/F/G/H/J/K 77-83
MX100F/G/H/J/K
PINGEL®POWER-FLO
FUEL VALVES
These top quality fuel
valves feature an aluminum
body only 1.25" tall. Their compact
design and stainless steel components
make a rugged replacement for those
stock vacuum type fuel petcocks. Another
advantage lies in their patented, full flow
valves which offer better flow for racing
applications. Available in satin & polished finish.
FUEL PETCOCKS
18-7167 3/8" threaded body, with single 5/16" hose outlet
with reserve function.
18-7137 Polished version of 18-7167
18-7201 3/8" threaded body, with dual 5/16" hose outlets
with reserve function.
18-7138 Polished version of 18-7201
PINGEL® ADAPTER PLATES & NUTS
18-7204
18-7216 18-7206
18-7225 18-7226 18-7202
18-5703
Gas tanks requiring plates can use these to install the Pingel® gas
valves. Just measure the distance between the two mounting holes
of the gas tank you want to install the Pingel® gas valve on and
order the matching adapter plate. Nuts allow you to fit Pingel® gas
valves onto gas tanks with threaded bungs.
PLATES
18-7206 3/8" NPT, 34mm center to center chrome adapter plate
18-7216 3/8" NPT, 44mm center to center chrome adapter plate
18-7225 3/8" NPT, 46mm center to center chrome adapter plate
18-7226 3/8" NPT, 50mm center to center chrome adapter plate
18-5703 3/8" NPT, 44mm center to center chrome angled
adapter plate (for large carburetor clearance)
NUTS
18-7202 Adapts 7/8" or 22mm male tank
bung to 3/8" NPT. (Stock H-D, 1975 and up)
18-7204 Adapts 15/16" or 24mm bung
to 3/8" NPT.
MOTION PRO INLINE FUEL VALVES
35-8495 35-8476 35-8468
Ideal for ATV’s and other vehicles where inline fuel control is needed.
Check fuel line size and engine size before ordering. Not recommended
for engines above rated size.
35-8468 3/16” I.D. Fuel Valve, up to 200cc
35-8476 1/4” I.D Fuel Valve, up to 300cc
35-8495 5/16” I.D. Fuel Valve, up to 300cc
18-7201
18-7167
SHOP EQUIP & TOOLS HARD PARTS CARB & FUEL IGNITION/ELECTRICAL CONTROL SUSPENSION ACCESSORIES
193