shop main D-2011 - Moto-Services

K&L VACUUM GAUGES
EMGO ECONOMY CARB SYNC GAUGE SETS
Perfect for retail sales, these gauges include hoses, 5 and 6mm
adapters , and individual damping control. Assembly required.
35-7294 Emgo Economy Carb Sync Gauge-two cylinder
35-7295 Emgo Economy Carb Sync Gauge-four cylinder
35-7294 35-7295
SYNCHROMATE 2
SynchroMate 2 has all the features of the
CarbMate, but includes a built in tach with 50
rpm increments, and a gauge function that
measures & displays vacuum The optional 2-4
channel adapter set allows 4 cylinder bikes to
be serviced as well. Works on carbureted and
fuel injected motorcycles. Includes two
5mm & two 6mm rigid threaded adapters
35-8311 SynchroMate 2
35-8319 2 to 4 Channel Adapter
35-7992 Replacement Battery Cord
CARBMATE
Synchronization is indicated by a
series of LEDs. Center LED will light
when equalization is achieved.
Accurate to within 0.5 cm/Hg true
resolution, and unaffected by barometric
pressure changes, the dual
channel design can synchronize 3 & 4
cylinder engines with optional 4-channel
adapter (35-8319) Powered by
external 12V source or vehicle battery.
Two year limited warranty
35-9794 CarbMate
35-8319 2 to 4 Channel Adapter
35-7992 Replacement Battery Cord
2" gauges feature 0-76cm/hg
readings and a high grade chrome
finish. Deluxe set Includes Storage
case, Rubber hoses, and 5 & 6 mm
adapters with extensions.
Built in restrictors eliminate
needle bounce.
35-3019
Deluxe Vacuum gauge set
35-3020
Economy gauge set (Gauges
only, no hoses, case or adapters)
CARBURETOR SYNCHRONIZERS
Deluxe Soft Case, 35-9812
VACUUMMATE (ALLWEATHER)
The VacuumMate is the industry standard for fast & accurate synchronizing
of carburetor / FI throttle valves on 2 & 4 stroke engines,
with “smart” valve diagnostics & ‘wireless’ RPM measurement.
Synchronize up 6 cylinders with optional adapter kit. (35-8114)
Intake synchronizer • Dynamic fault analyzer • Tachometer Three
selectable modes provide full diagnostic capabilities ‘RPM’ mode for
adjustment of engine speed of 2 & 4 stroke engines during synchronizing.‘AVE’
mode with 3 overlapping scales from 5 to 55cm Hg &
fixed resolution of 0.5cm Hg for general synchronizing.‘DYN’ mode
for troubleshooting - allows for immediate visual check why engine
cannot synchronize, possible causes include non sealing valves or a
cracked manifold. Includes soft nylon travel case, battery cord-set,
T-connector & 4 x M5 & M6 flexi-rigid manifold adapters.
35-8108 VacuumMate Allweather with internal battery
35-8111 VacuumMate Allweather without internal battery
35-9812 Deluxe Soft Case, fits IgnMate,VacMate,CarbMate,
Syncmate.
35-8802 5mm Replacement Flexi-Rigid Adapter,Sold EACH
35-8803 6mm Replacement Flexi-Rigid Adapter,Sold EACH
35-8114 VacuumMate 4 to 6 Channel Adapter
Allows synchronization of 6 cylinder engines
35-7992 Replacement Battery Cord
SYNCHPRO
is the simple to use, spill proof alternative to
mercury synchronizers. Priced less than electronic
carb tuners, 5 mm adapters are included making
SynchPRO perfect for home or professional use.
35-7987 SynchPRO Carburetor Tuner
35-7988 Replacement Fluid for SYNCHPRO
35-9118 6mm Adapter Set -4 piece set Qty-2 short
and Qty-2 Long adapters
DIGITAL VACUUM TESTER
This digital display vacuum tester from Japan is small and lightweight.
Digital LCD (40 dot) display can easily be read under bright
sunlight. DC12V powered. Tester allows you to synchronize
carburetors precisely. Test capabilities:
• Range of measurements:
0 ~ 40 kPa (40 kPa range/minimum
resolution 1kPa )
• 2 ~ 80 kPa (80 kPa range/minimum
resolution 2kPa )
• Measurement accuracy: 5%
(full scale)
Made in Japan.
35-9589 Digital Vacuum Tester
(Electronic Carb Synchronizer) Includes
vacuum gauge main body, power cord
with clips, Instruction sheet and qt 4
vacuum hoses. Hoses are 40” long.
SHOP EQUIP & TOOLS HARD PARTS CARB & FUEL IGNITION/ELECTRICAL CONTROL SUSPENSION ACCESSORIES
73