shop main D-2011 - Moto-Services

SHOP EQUIP & TOOLS
HARD PARTS
CARB & FUEL
IGNITION/ELECTRICAL
CONTROL
SUSPENSION
ACCESSORIES
46
LASER ALIGNMENT, SUSPENSION SERVICE TOOLS
MOTION PRO FORKTRU FORK ALIGNMENT TOOL
Easy to use tool for aligning front forks; improves handling. Reduces
seal and bushing wear and fits most MX and Off-Road motorcycles.
Works on 27 mm - 62 mm fork legs and tubes; and forks that are 140
mm to 220 mm on center. Knurled adjustment screws for easy setup
35-5809 Motion Pro ForkTru Fork Alignment Tool
35-5820
35-5809
35-5823
MOTION PRO 49 AND 50MM FORK CAP WRENCHS
50 mm, 6 point box wrench for removing the fork cap (cartridge) on
WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm)
forks on late-model KTM's. 12 mm slot for holding the damper rod for
removing the rebound bolt.
35-5820 50MM Fork Cap Wrench for WP Forks 49 mm, 8 point box
wrench for removing the fork cap (cartridge) on dual chamber closed
cartridge forks on late-model Yamaha's.
35-5823 49MM Fork Cap Wrench
MOTION PRO COMPRESSION
BOLT REMOVAL TOOL FOR KTM
This tool fits 2007 and 2008 KTM with
White Power 4860 MXMA CC forks,
and is designed for removing
and installing the compression
valve assembly from the fork
cap. Tool also allows you to
properly torque the compression
valve assembly during installation.
17mm head, made of
6061 T-6 aluminum.
35-5811 Motion Pro Bolt Removal Tool
TABLETOP DIGITAL SCALE
35-4323 Laser CAT
(Included in 35-4320 & 35-4322)
PROFI LASER ALIGNMENT TOOLS
Designed for precise, repeatable, and easily readable results. The BAT
is invaluable to diagnosis bikes that have been in accidents as well as
used bikes. Simply press the CAT against the side of the sprocket, the
integrated laser will illuminate the chain-links and visualizes the real
running direction of the chain. Wrong adjustments are shown and can
be corrected immediately with the aid of this precise measuring tool.
35-4320 Laser BAT (Bike Alignment Tool) for V-Twin
35-4322 Laser BAT (Bike Alignment Tool) for Sport Bike & Metric
35-4323 Laser CAT (Chain & Belt Alignment Tool)
PB-1 & PB-5 PORTABLE WORKBENCH
The PB-1 is a work table that folds for easy transport and storage;
perfect for races or the garage. Features a large work surface
(91.5cm x 58.5cm) with slots, holes, and recesses to hold tools,
lubes, beverages, and whatever else you can think of. Folding
steel legs provide a solid base for a toolbox and supplies. PB-5
Hand Truck Kit Converts your PB-1 into a two-wheeled hand
truck that folds away when not in use.
Dimensions:
Set up- 91.5cm x 58.5cm x 82.5cm
Folded- 108cm x 58.5cm x 18cm
35-6771 PB-1 Portable Workbench
35-6772 PB-5 Hand Truck Kit
PB-5 Hand Truck Kit in use
35-6772 PB-5 Hand Truck Kit
This highly accurate tabletop scale is perfect for weighing small parts and
components in grams or ounces.
• Accurate to within 2g/ 1000g, 2g/ 2000g, 3g/ 3000g
• Tare feature to exclude weight of container
• Switches easily between grams and ounces
• 3000 gram (106 oz) capacity
• Battery included (one of size CR2032)
35-1510 Park Tools - Tabletop Digital Scale