shop main D-2011 - Moto-Services

SHOP EQUIP & TOOLS
HARD PARTS
CARB & FUEL
IGNITION/ELECTRICAL
CONTROL
SUSPENSION
ACCESSORIES
52
SHOP EQUIPMENT
20-TON HYDRAULIC PRESS
37-9632
35-4001
U-Block sold as an option MANUAL BEARING PACKER
Packs 50 to 60 bearings without refilling. Use on
all cage-type roller or ball bearings up to 2” bore.
No air line or grease gun required.
Use to flush out the old grease with new.
35-4002
• All Welded Steel Construction
• Reinforced head Plates
• 20-ton jack included
• Made in U.S.A.
37-9632 20-Ton Hydraulic Press only with jack (U-Blocks sold separate)
OPTIONAL ACCESSORIES
35-4001 Split Bearing Puller 2-1/4” max. reach
35-4002 Split Bearing Puller 4-1/4” max. reach
35-9443 36mm Fork Tube U-Block (for 33 thru 36mm tubes)
35-9447 40mm Fork Tube U-Block (for 37 thru 40mm tubes)
35-9448 43mm Fork Tube U-Block (for 41 thru 43mm tubes)
35-9449 46mm Fork Tube U-Block (for 44 thru 46mm tubes)
35-9416 49mm Fork Tube U-Block (for 47 thru 49mm tubes)
35-9420 52mm Fork Tube U-Block (for 50 thru 52mm tubes)
35-9603
CRANK BEARING/GEAR PULLER SET
Used to pull both gears and bearings from cranks.
35-9603 Crank bearing and gear puller set
35-9816 Manual Bearing Packer
35-1342
CV-2 SYNTHETIC GREASE
CV-2 contains a red organic moly and possesses a very high melting
point, excellent water washout resistance and superior anti-wear.
Use for wheel bearings, high-angle and conventional CV-joints ,
chassis lubrication and high-temperature industrial equipment.
35-1342 CV-2 Synthetic: 14 oz. Tub/Jar
35-1373 CV-2 Synthetic: 14 oz. Tube for “Gun Type” application
35-7679
35-9806
UNIVERSAL BEARING PACKER
A fast simple way of applying grease to bearings. Just place bearing between
plastic cones, tighten and apply grease through fitting on end of threaded
shaft. Forces out old grease and evenly injects fresh grease.
35-9806 Universal Bearing Packer
35-1373
K&L CARB SERVICE STAND
Conveniently positions carburetors at ideal height and allows 360°
rotation for easy access. Parts storage base can be bench mounted.
Ideal for single and multi carbs. Included expansion plugs hold
carbs with openings from 22mm to 41mm I.D. for unobstructed use.
35-7679 K&L Carb Service Stand