shop main D-2011 - Moto-Services
shop main D-2011 - Moto-Services
shop main D-2011 - Moto-Services
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SHOP EQUIP & TOOLS<br />
HARD PARTS<br />
CARB & FUEL<br />
IGNITION/ELECTRICAL<br />
CONTROL<br />
SUSPENSION<br />
ACCESSORIES<br />
44<br />
SUSPENSION SERVICE TOOLS<br />
35-8677 35-8678 35-8679<br />
SHOCK SEAL BULLET TOOL<br />
“Bullet Tools” make seal head installation onto shafts quick and easy.<br />
35-8677 TSSB125 12.5 x 10mm Shock Seal Bullet<br />
35-8678 TSSB14 14 x 12mm Shock Seal Bullet<br />
35-8679 TSSB16 16 x 12mm Shock Seal Bullet<br />
SOFT-FACE PROTECTORS<br />
These aluminum protectors help<br />
prevent damage to fork spring<br />
spacers. Designed to work with<br />
Race Tech TFSC01 Fork Spring Tool.<br />
(K&L# 35-8680)<br />
35-2764 Soft-Face Protectors<br />
Sold in pairs<br />
35-2764<br />
Soft-face protectors in use<br />
on Fork Spring Compressor<br />
TFSC01, K&L# 35-8680<br />
FORK SPRING COMPRESSOR TOOL<br />
This unique fork spring compressor is designed to work on most<br />
current sport bikes and road racers. It allows the spring to be<br />
compressed while the fork cap is removed from the rod. It can be<br />
used on or off the bike on most models.<br />
35-8680 Fork Spring Compressor Tool TFSC01<br />
35-2764 Soft-Face Protectors, set of 2<br />
Tool Tool Up Up for for Profit<br />
www.klsupply.com<br />
35-8672 35-8673 35-8674<br />
35-8675<br />
SHAFT HOLDING TOOL (VISE INSERTS)<br />
Holds fork damping rods, cartridges, shock shafts, etc. while<br />
servicing. (aluminum)<br />
35-8672 TFSH10 Shaft Holding Tool 10, 12, 12.5, & 14mm<br />
(Damping Rods)<br />
35-8673 TFSH14 Shaft Holding Tool 14, 16, & 18mm<br />
(Shock Shafts)<br />
35-8674 TFSH20 Shaft Holding Tool 20, 24, & 29mm<br />
(20 & 25mm Fork Cartridges)<br />
35-8675 TFSH32 Shaft Holding Tool 32 & 35mm<br />
(28 & 32mm Fork Cartridges)<br />
Dampner Rod<br />
35-4302<br />
ALUMINUM VISE INSERT<br />
Aluminum Vise Insert provides a safe<br />
way to hold small suspension shafts<br />
and fittings securely without damage.<br />
Aluminum jaws have three machined<br />
opening to hold shaft from 7mm to<br />
15mm. Bridge spring allows the tool<br />
to automatically open.<br />
35-4302 Aluminum Vise Insert<br />
TWIN CHAMBER TOOL from MOTO-TEK<br />
This tool allows the technician to easily compress the<br />
fork spring and position the fork rod for easy disassembly<br />
on Showa, KYB, and WP Twin Chamber<br />
forks. The tool eliminates damage to the fork rod,<br />
speeds up production and makes life much easier for<br />
a professional or home shock tech. This tool eliminates<br />
many flaws with existing twin chamber rod<br />
holders,which can actually cause<br />
damage to fork cartridge rods and<br />
do not make it any less awkward.<br />
Make life easier today with this<br />
easy to use tool.<br />
35-8351 Twin Chamber Tool