shop main D-2011 - Moto-Services

M.P HEX AXLE TOOL
(STEEL)
Tool fits the internal hex on many
late model sport bike axles and some
dirt bikes. It features metric hex sizes
of 17, 19, 22 and 24mm, and has 3/8 in.
square drive on both ends.
35-2303 Motion Pro
Hex Axle Tool (Steel)
35-8578
35-7995
35-1964
35-8571
FRONT FORK CAP SOCKET
Designed to remove and install Yamaha front fork
caps with female hex head. Sold each.
35-8571 17mm Fork Cap Socket
35-8573 19mm Fork Cap Socket
RACE TOOLS SHOCK BLADDER
PULLER
This Puller threads onto the shock reservoir
schrader valve for easy bladder removal.
35-2510 Race Tools Shock Bladder Puller
35-2303
35-8580
FORK DAMPER ROD TOOLS Sold each.
35-7995 Combination Fork Damper Tool
Designed to hold the damper rod during assembly &
disassembly of Honda XR400’s or Suzuki DR-Z400S.
One end features spanner type prongs for the XR400 and
the other a 27mm hex for Suzuki.
35-1964 Combination Damper Rod Fork Tool
Designed for assembly and disassembly of most inverted
Kayaba and Showa 41mm, 43mm, and 45mm forks. Use
one end for Kayaba forks and the other for Showa forks.
(not required for 91-92 Honda CR models)
Replaces Yamaha YM-01423, Honda 07PMB-KZ4010A
35-8578 YM-01418 Yamaha 43mm Kayaba Front Forks
YZ125/250 (1988) YZ490 (88-90), TTR250
35-8580 YM-01434 Double sided damper rod holder
Yamaha Street XV1700, YZF-R1, YZF-R6
Yamaha Offroad YZ125/250 models (89-90)
35-8573
6 Point Hex
35-2510
SUSPENSION SERVICE TOOLS
35-8703
K&L FORK DAMPER ROD BLEED TOOL SET
This tool threads on to damper rod and allows better control of
bleeding. Works on most Japanese applications.
35-8703 K&L Fork Damper Rod Bleed Tool Set
Includes 3 adapters: 9 x 1.0mm, 10 x 1.0mm, and 12 x 1.25mm
35-8576 35-8577
FORK DAMPER ROD HOLDERS
Holds damper rod when disassembling and assembling front forks.
Provides a positive means of holding the inner damper rod while
removing the bolt from the bottom of the fork leg. Sold each.
35-8576 30mm Hex YM-01327-Yamaha 43mm Kayaba forks,
YZ125 (84-87), YZ250 (81-87) IT250 (1983) YZ490 (82-87)
35-8577 24mm Hex YM-01328-Yamaha 38mm Kayaba forks,
YZ125 (81-83), IT175 (82-83), IT250 (81-82) YZ250 (77-80),
YZ400 (77-79), IT465 (81-82)
35-0668 Tool 25-Kawasaki applications
FORK CAP WRENCH 46/50MM
Applications:
Honda CR250 (97-00), Suzuki
RM125/250 (96-00). Also removes
compression adjuster assembly on
35-8670
Suzuki RM125/250 (98-00). Sold each.
35-8670 Fork Cap Wrench 46/50mm TFCW4650
35-7803
MOTION PRO FORK CAP WRENCH 46 / 50MM
Designed to remove the front fork caps on late model Honda CR’s
and Suzuki RM’s. Can also be used for adjusting compression stack
on late model RM’s. One end of wrench is 46mm, the other is 50mm.
Sold each.
35-7803 Fork Cap Wrench
FORK OIL REPLACEMENT KIT
Special clear plastic tube and fitting allows
replacement of fork oil through the drain plug,
without disassembling the fork and front end.
Fork oil not included.
35-8275 Fork Oil Replacement Kit.
8mm x 1.25mm thread pitch fitting
NOTE: For motorcycles with air suspension only.
35-8275
SHOP EQUIP & TOOLS
HARD PARTS
CARB & FUEL
IGNITION/ELECTRICAL
CONTROL
SUSPENSION ACCESSORIES
43