shop main D-2011 - Moto-Services

MOTION PRO PISTON PIN REMOVAL TOOL
This high quality shop tool removes 12mm-25mm pins from
40mm-100mm pistons.
35-5961 Motion Pro Piston Pin Removal Tool
MOTION PRO
SPRING HOOK
PULLERS
35-1992
35-2929
35-1992 Motion Pro Heavy Spring Hook Puller. (w/ T-Handle)
35-2929 6” length Spring Hook Puller.
MOTION PRO TORQUE WRENCH ADAPTER 12mm/14mm
Made from chrome vanadium tool steel with hard nickel pewter finish.
Properly torque two-stroke cylinder base nuts and hard to reach fasteners.
Multiply your torque wrench readings by using chart supplied with the
tool for proper torque specifications. Always check with your owners
manual for proper torque specifications for each model.
35-0910 Motion Pro Torque Wrench Adapter
MOTION PRO STUD INSTALLATION TOOLS
These hex head stud tools will allow installation of cylinder studs
on most motorcycle applications without damaging the threads.
Hex head is 3/4” or 19mm.
35-9765 Motion Pro Stud Installation Tools.
Includes: 6mm, 8mm and
10mm hex head stud tools.
MOTION PRO ADJUSTABLE TORQUE WRENCH ADAPTER
Apply up to 90ft/lbs of torque using standard combo & allen wrenches.
35-7986 Motion Pro Adjustable Torque Wrench Adapter
PISTON RING FILER
File piston rings with this portable rotary
file. Use to accurately size any make or
diameter ring. Filer includes extra hard,
fine-grit carbide coated cutter.
35-8725 Piston Ring Filer
35-8726 Replacement file for 35-8725
(not shown) Extra hard,
fine-grit carbide coated cutter
file for long life.
PISTON BASE HOLDERS
Sold each.
35-9810 3/16” thick x 5-1/4” length
35-9811 1/2” thick x 6-3/4” length
TOP END TOOLS
4 PC FRACTIONAL STUD PULLER SOCKET SET
Used to install and remove engine studs. Includes 6, 8, 10, 12mm fractional
stud puller sockets that grab the bolt below the threads, preventing
damage. Can also be used with 5/16”, 3/8”, and 7/16” studs. For
use with Socket drive or 21mm box/open end wrench. Packaged in a
durable molded carry case.
35-2217 Stud puller set
QUICK RELEASE RING COMPRESSOR
Quick release makes it easy to remove from piston.
Range is from 2-1/8” ~ 5” (54mm ~ 127mm).
Sold each.
35-8723 Quick Release Ring Compressor
PIPE END SHAPER
Rounds out exhaust pipes that are crushed or bent.
Range is 1-1/2” - 3” (38.10 - 76.20mm). Sold each.
35-9269 Pipe End Shaper
CYLINDER HEAD NUT WRENCH
8mm (engine in frame) Fits XZ550 Vision, XVZ12/XVZ13
Venture & Venture Royale and VMX12 V-Max. Sold each.
35-8405 YM-28897
SHOP EQUIP & TOOLS HARD PARTS CARB & FUEL IGNITION/ELECTRICAL CONTROL SUSPENSION ACCESSORIES
83