PhotoPlus X6 User Guide - Serif

50 Making Image Adjustments
To apply an adjustment (from a favourites preset):
1. From the Favourites tab, scroll the tab to review the categorized
adjustments; select a preset or custom thumbnail.
2. Click OK.
When applied, your image layer is automatically converted to a non-destructive
filter layer with a PhotoFix adjustment entry nested under the filter layer entry.
To apply an adjustment (using custom settings):
1. Review the available adjustments in the Filters section, before expanding the
adjustment you want to apply by clicking Expand filter.
2. Modify the adjustment using sliders, check boxes, graph adjustments, and
drop-down lists (you can also enter absolute values into available input
boxes). The image will be adjusted automatically to reflect the new settings
in the preview window.
You'll notice the adjustment filter is enabled once a setting is changed, i.e.
the Enable/disable filter option becomes greyed out ( ).
3. Click OK. A filter layer is created (as above).
To reset (and disable) a modified adjustment:
• Click Reset settings in the top-right corner of the adjustment's
pane.
To edit PhotoFix adjustments:
• Double-click the PhotoFix entry on the filter layer. PhotoFix is
launched with the previously set adjustments still applied.