01.06.2013 Views

IPC@CHIP Documentation - SC12 @CHIP-RTOS V1.10

IPC@CHIP Documentation - SC12 @CHIP-RTOS V1.10

IPC@CHIP Documentation - SC12 @CHIP-RTOS V1.10

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Related Topics<br />

Top of list<br />

Index page<br />

IP subnet mask initial value<br />

Initial DHCP setting<br />

Set IP subnet mask API function<br />

GATEWAY address<br />

Define the IP address of the gateway<br />

Comments<br />

Example<br />

Sets the IP address of the default gateway to use.<br />

This command modifies the information stored in A:\chip.ini.<br />

The DHCP option is also switched off.<br />

The new gateway address is not used until after a IPETH command or a restart of the system.<br />

Use the IPCFG command to verify your entry before restarting the system.<br />

GATEWAY 195.243.140.1<br />

Related Topics<br />

Top of list<br />

Index page<br />

IP GATEWAY initial value<br />

Set gateway IP address API function<br />

ADD_DEFAULT_GATEWAY API function<br />

Initial DHCP setting<br />

DHCP 0/1<br />

Enable/Disable DHCP.<br />

Comments<br />

Enables or disables the use of DHCP for the internal Ethernet interface to obtain an IP configuration.<br />

DHCP is an abbreviation for "Dynamic Host Configuration Protocol".<br />

Using a DHCP Server, the network administrator can define the IP configuration of the network, without<br />

manually configuring each device on the network.<br />

Network servers and some ISDN routers offer a DHCP server.<br />

Page 25 / 400

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!