IPC@CHIP Documentation - SC12 @CHIP-RTOS V1.10

Parameters
AH
Must be 0x15
Return Value
returns nothing
Related Topics
Top of list
Index page
Initial batch mode configuration
Run-time batch mode selection
Interrupt 0xA0 service 0x16: Get information about the @CHIP-RTOS features
Parameters
AH
Get information about running servers, interfaces and features of the @CHIP-RTOS
0x16
Return Value
Bits of AX, BX and DX indicate the services or devices available, coded as:
Bit=0: service or device is not available.
Bit=1: service or device is available.
AX:
BX:
DX:
Top of list
Index page
Bit 0: Ethernet device for TCP/IP
Bit 1: PPP server
Bit 2: PPP client
Bit 3: Web server
Bit 4: Telnet server
Bit 5: FTP server
Bit 6: TFTP server
Bit 7: DHCP client
Bit 0: SNMP MIB variables support (see TCP/IP API service 0x71)
Bit 1: UDP config server
Bit 2: Ping client (see TCP/IP API service 0x75)
Bit 3: TCP/IP device driver API(see TCP/IP API service 0xA0 - 0xA7)
Bit 4: Webfile upload (Webserver PUT method)
Bit 0: I2C-Bus API
Bit 1: Hardware API
Bit 2: RTOS API
Bit 3: Packet driver interface for Ethernet
Bit 4: Serial XMODEM file transfer
Bit 5: External disk interface
Bit 6: Software SPI API
Interrupt 0xA0 service 0x17: Get MAC address of the Ethernet interface
Get the MAC address as a 6 Byte array.
Page 87 / 400