IPC@CHIP Documentation - SC12 @CHIP-RTOS V1.10

Top of list
Index page
IP
ADD_DEFAULT_GATEWAY API function
[IP]
DHCP=0/1 Ethernet interface
Comments
Set to 1 if DHCP client should be used to get the IP configuration for the internal Ethernet interface from a
DHCP server.
If defined as 0, a static network configuration is used.
Any settings for IP Address, subnet mask and gateway are ignored if DHCP is used.
Related Topics
Top of list
Index page
IP
DHCP command line
[IP]
HOSTNAME_OPT=0/1 DHCP hostname option
Comments
Top of list
Index page
IP
Set to 1 if DHCP client of the IPC@CHIP should append the device name at the DHCP request option
field with DHCP option number 0x0C.
If set to 0 (default), the device name will not be appended to the DHCP request.
This name feature can be used for the configuration of a DHCP server, e.g. to give a fixed IP to an
IPC@CHIP which is configured with a device name.
[IP]
TCPIPMEM=Size
Set the size of the TCP/IP memory block in kBytes. This block is allocated at the start
of the TCP/IP stack.
Page 39 / 400