IPC@CHIP Documentation - SC12 @CHIP-RTOS V1.10

You can define a USER0 and a USER1.
Default users are: 'anonymous' (no password) and 'ftp' (password is 'ftp').
You must specify both the user name and their password.
Neither user name nor password are case sensitive.
Maximum name size: 19 characters
Important notice: To avoid security leaks you must define both user names and passwords.
Related Topics
Top of list
Index page
FTP
FTP user write protection
[FTP]
PASSWORDx=password
Comments
Top of list
Index page
FTP
Define the password for a FTP user
You can define a PASSWORD0 for USER0 and a PASSWORD1 for USER1
Default users are anonymous (no password) and ftp (password is 'ftp').
Neither user name nor password are case sensitive.
Maximum password size: 19 characters
[FTP]
ACCESSRIGHTx=Access rights for defined Users
Comments
This CHIP.INI entry allows you to deny write access to FTP USER0 or USER1.
0 - write and read access enabled
1 - write access denied, read access enabled
Example which disables FTP write access for USER0:
[FTP]
USER0=otto
PASSWORD0=otto53pass
ACCESSRIGHT0=1
You can only forbid write access if you have defined the respective user with the FTP USERx and
Page 58 / 400