VCDS Release 11.11 PDF Manual Printing Instructions: - Ross-Tech
VCDS Release 11.11 PDF Manual Printing Instructions: - Ross-Tech
VCDS Release 11.11 PDF Manual Printing Instructions: - Ross-Tech
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>VCDS</strong> - Advanced Measuring Values - Section 13-A<br />
This function expands on the Measuring Blocks function and lets you select up to 12<br />
measuring values from as many as 12 different groups from a selection dialog that shows<br />
the contents of the measuring values. This function is available only when a label file exists<br />
for the control module being accessed. For controllers using the UDS/ODX/ASAM protocol,<br />
the Measuring Blocks function is not available and you MUST use Advanced Measuring<br />
Blocks instead. For UDS controllers, the “Group UDS requests” checkbox can speed up<br />
sample rates.<br />
Warning!<br />
If you wish to observe real-time data while<br />
driving the car, please use a second<br />
person! Let one drive while the other<br />
observes the data, making sure the person<br />
holding the PC is not in front of an active<br />
airbag!<br />
Note: You may also want to try the<br />
Measuring Blocks function, which accesses<br />
the same data but in a different format.<br />
(see Section 7 of this manual).<br />
The Advanced Measuring Values function<br />
has two screens, the main one shown<br />
above and the Item Selection Window<br />
shown to the right. Check each value you<br />
would like to show and uncheck each that<br />
you would like to remove. ►
Change language