VCDS Release 11.11 PDF Manual Printing Instructions: - Ross-Tech

VCDS – Adaptation / Long Adaptation - Section 20-A
(VAG 1551/1552 function 10)
The Adaptation function allows you to alter certain values and/or settings in control
modules that support it.
Warning!
You should refer to the Factory Repair Manual for your particular car (or some other
documented procedure) before "playing" with the Adaptation function. However, many
available Adaptation Channels are totally undocumented! You can use the [Up] and [Dn]
buttons next to Channel Number to scroll through all 255 possible channels, or you can
manually enter a channel number and click [Read]. If a channel exists, VCDS will show
you the Stored Value. If a channel does not exist, the Stored Value will show as "N/A".
Other data the controller may or may not send will be decoded and shown in the four
display fields at the top of the screen.
If an Adaptation Error warning appears, indicating that the control module is Uninitialized
you must let VCDS write defaults to the WSC, Importer and Equipment numbers before the
value can be changed. Click [Yes] followed by [Do It!]