VCDS Release 11.11 PDF Manual Printing Instructions: - Ross-Tech

More documents

Recommendations

Info

Getting Started - Section 1-B Step #3 (USB Only) ► If you are using a Serial Interface then you can proceed to step #4. If you are using a USB Interface, a message like this should pop up: ► The drivers many install automatically in Windows 7 or Vista. If you are using XP or W2000, click on the Found New Hardware message and the Found New Hardware Wizard should start up. If you are prompted with the choice, pick “No, Not This Time” when asked if you want to connect to the Internet to search for drivers. Select "Install the software automatically (Recommended)" then click [Next >] The process should be automated but you may need to click “Continue Anyway” part way through the process. If, for some reason, you installed the USB Interface without following the above instructions, and VCDS does not work correctly, go into your PC’s Device Manager while the USB Interface is connected. You can find the Device Manager by right-clicking on My Computer in XP or on Computer in Vista or 7. Select Manage to bring up Computer Management. On the left side of the screen under System Tools, select Device Manager. Find the “VCDS Compatible USB Interface” or similar and delete it. It may be under “Other Devices” or under “Universal Serial Bus Controllers”. Next, unplug the USB Interface from your PC, wait 5 seconds and plug it back in. Proceed with the installation starting on Step 2. Step #4 ► Connect the car end of your Interface to your vehicle’s Diagnostic Port. ► ◄ If your vehicle has a 2x2 port (some pre-1996 vehicles), then use the optional 2x2 Adapter between the Interface and the ports in the car. This is included in the Pro-Kit. Turn the vehicle’s ignition switch to the ON position. Make sure the key is turned far enough that the dash lights are fully illuminated. The engine may either be running or stopped.
Step #5 ► Getting Started - Section 1-C Start the VCDS program on your PC through either the Start Menu or the VCDS icon on your Desktop. Step #7► Once you are in the Options Screen, Select the correct port for your PC’s USB Port (USB) or Serial Port (typically COM1 or COM2) and click the [Test] button. Ensure that VCDS finds your interface. ◄ Step #6 From the Main Screen in VCDS click the [Options] button to go into the Options screen.
Page 1 and 2: VCDS Release 11.11 PDF Manual Print
Page 3 and 4: Disclaimer: All rights reserved, No
Page 5: VCDS - Getting Started - Section 1-
Page 9 and 10: VCDS - Main Screen - Section 2-A Th
Page 11 and 12: Auto Scan cont. - Section 3-B There
Page 13 and 14: Auto-Scan cont. - Section 3-D The V
Page 15 and 16: VCDS - Open Controller- Section 5-A
Page 17 and 18: VCDS - Fault Codes - Section 6-A (V
Page 19 and 20: Fault Codes cont. - Section 6-C [Pr
Page 21 and 22: Measuring Blocks cont. - Section 7-
Page 23 and 24: Measuring Blocks cont. - Section 7-
Page 25 and 26: Data Logging cont. - Section 8-B Du
Page 27 and 28: VCDS - Single Reading- Section 9-A
Page 29 and 30: VCDS - View Readiness - Section 11-
Page 31 and 32: View Readiness cont. - Section 11-C
Page 33 and 34: VCDS - Advanced Measuring Values -
Page 35 and 36: VCDS - Acceleration Measurement - S
Page 37 and 38: VCDS - 7-digit PIN/SKC - Section 16
Page 39 and 40: Basic Settings cont. - Section 17-B
Page 41 and 42: Notes: Basic Settings cont. - Secti
Page 43 and 44: Output Tests cont. - Section 18-B O
Page 45 and 46: Output Tests cont. - Section 18-D M
Page 47 and 48: Recode cont. - Section 19-B A featu
Page 49 and 50: Recode cont. - Section 19-D Long Co
Page 51 and 52: Recode cont. - Section 19-F On some
Page 53 and 54: Adaptation / Long Adaptation cont.
Page 55 and 56: VCDS - Security Access Screen - Sec
Page 57 and 58:
SRI Reset cont. - Section 22-B The
Page 59 and 60:
Generic OBD2 cont. - Section 23-B I
Page 61 and 62:
VCDS - Transport Mode - Section 25-
Page 63 and 64:
VCDS - EDC-15-16 Mileage Checker -
Page 65 and 66:
VCDS - Optical Bus Diagnostics - Se
Page 67 and 68:
Port and Protocol Options Select Po
Page 69 and 70:
Options Screen cont. - Section 30-D
Page 71 and 72:
License Info VCDS - About Screen -
Page 73 and 74:
Quick Instructions cont: VC-Scope c
Page 75 and 76:
Step by step: TDI Timing Checker co
show all

VCDS Release 11.11 PDF Manual Printing Instructions: - Ross-Tech

Create successful ePaper yourself

Delete template?

Save as template?