Reference - Konica Minolta

14.2 User settings 14
14.2 User settings
14.2.1 [Print Settings]
[Paper Settings]
Specify settings for the paper and paper trays.
% Press the Utility/Counter key ö[User Settings] ö [Print Settings] ö [Paper Settings].
Settings
[Paper Tray
Settings]
[Default Tray] Select the paper tray that is given priority.
[Tray 4] and [Tray 5] do not appear if the optional Paper Feed Cabinet
PC-211 have not been installed.
[Tray 1] [Size Detection
Mode]
Select whether or not to automatically detect the
size of paper loaded in the tray 1.
[Paper Size] Select the size of paper loaded in the tray 1.
If [Size Detection Mode] is set to [Auto], the size of
paper loaded in the tray 1 is automatically selected.
You cannot change the size to other sizes from the
control panel.
[Custom Size] Press [Width] and [Length], and then type in the paper
size.
These settings can be specified if [Paper Size] is set
to [Custom].
[Paper Type] Select the type of paper loaded in the selected tray.
[Tray 2] [Paper Size] Display the size of paper loaded in the tray 2.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type] Select the type of paper loaded in the selected tray.
[Tray 3] [Paper Size] Display the size of paper loaded in the tray 3.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type] Select the type of paper loaded in the selected tray.
[Tray 4] [Paper Size] Display the size of paper loaded in the tray 4.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type] Select the type of paper loaded in the selected tray.
[Tray 5] [Paper Size] Display the size of paper loaded in the tray 5.
The detected paper size is automatically selected,
so the size cannot be changed to other sizes from
the control panel.
[Paper Type] Select the type of paper loaded in the selected tray.
bizhub 42/36 14-3