Reference - Konica Minolta

6.2 Selecting and connecting a printer 6
5 Select the desired printer driver manually.
% From [Printer Model], select [KONICA MINOLTA], and then select the desired model from the list of
model names.
6 Click [Add].
When the selected printer is registered in the [Printer List], the setting procedure is completed.
Configuring the LPR settings
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1 In the [Apple Menu], select [System Preferences...].
2 Click the [Network] icon.
3 From [Show], select [Built-in Ethernet].
4 Click the [TCP/IP] tab.
5 Select the [Configure:] item and configure the settings including the IP address and subnet mask according
to the settings for the network to which the Macintosh computer is connected.
6 Click the close button at the top left corner of the window.
% When the [This service has unsaved changes or Apply configuration changes ] message appears,
click [Apply].
Adding a printer
1 Select [Macintosh HD] - [Applications] - [Utilities] where the driver has been installed, and then doubleclick
[Printer Setup Utility] or [Print Center] to open it.
2 When the [You have no printers available. ] window appears, click [Add]. When the printer list appears,
click [Add].
% If available printers have already been specified, the [You have no printers available. ] window does
not appear.
3 Select [IP Printing] for the connection method.
4 For OS X 10.3, select [LPD/LPR] for [Printer Type:].
5 In [Printer Address:], enter the IP address for the machine.
6 From [Printer Model:], select [KONICA MINOLTA], select the desired model from the list of model
names, and then click [Add].
bizhub 42/36 6-14