Installing the Printer Driver - Ednord

Printing on Media
How do I load and print custom media?
Do not use custom media that does not have approved dimensions
Width: 76 mm (3 in.) up to 216 mm (8.5 in.)
Length: 127 mm (5 in.) up to 356 mm (14 in.)
1 In the printer driver (Setup tab/Media Type option), select plain paper.
2 Set the media size (Paper tab/Original Document Size/Edit Custom...)
3 Load the custom media lengthwise and printing-side up in Tray 1.
4 Adjust the paper guides to the width of the custom media.
Note
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
5 Print the custom media.
How do I load and print envelopes?
Before printing on envelopes, we recommend printing a test page. If
the print result is not oriented as desired, select Rotated (Paper tab/
Orientation option).
Do not use envelopes that have
Sticky flaps
Tape seals, metal objects, paper clips, fasteners, or peel-off strips for
sealing
Transparent windows
Rough surface
Material that will melt, vaporize, or emit dangerous fumes
Been presealed
Printing on Media 25
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500