Installing the Printer Driver - Ednord

Indicator Messages
48
The control panel indicators (Ready, Error) provide information about your
printer and help you locate each problem.
Error Messages
These messages indicate errors which you must correct before a print job
can continue or the printer status returned to “Ready”.
Ready
indicator
(green)
Error
indicator
(orange)
Condition Action
Blinking Blinking Communication Error. Check the printer
cable.
Video Under-run Turn off the printer.
After a few seconds,
turn on the printer.
Change to a lower
resolution.
Rapid blinking alternately
No media in the tray
specified in the printer
driver.
Media size error
If the “Auto Continue”
option has been activated
in the Status Display,
the sheet already
fed in, is automatically
ejected after a predetermined
time.
Waiting for the Manual
Duplex.
Load the appropriate
type of media into
Tray 1.
Load the appropriate
size media into Tray 1.
Load the second side
of the media. (Refer to
the “Manual Duplexing”
on page 31.)
Waiting for a proof print Press the Cancel button
if the proof print is
acceptable. If it is not
acceptable, hold down
the Cancel button for
more than 5 seconds
to cancel the current
job.
Indicator Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500