Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NO<br />
Forhjul<br />
Deler:<br />
5 Hjul<br />
9 Forakselstøtte<br />
10 Forakselstag<br />
Right Axle 11 Gaffel<br />
d 8) onto the 12 Styrearm<br />
d poles on the 15 Rear Stor gaffelskive<br />
6). 17 Fjærskive<br />
18 Stor låsemutter<br />
t 5) onto the 19 extended M8 x 15 threaded styrebolt ends of the Rear Axle<br />
21 M8 x 25 styrebolt<br />
22 Skive<br />
st with Wheel<br />
23<br />
Spring<br />
Låsemutter<br />
Washer(Part 17) and Large lock<br />
ten large lock 24 Nut Saksesplint clockwise until <strong>wheel</strong>s are secure.<br />
L ASSEMBLY:<br />
upport<br />
t Axle Brace<br />
k Connector<br />
Washer<br />
g Washer<br />
ut<br />
ering Bolt<br />
ering Bolt<br />
22<br />
24<br />
23<br />
Brace(Part 10), then<br />
into the second 17 hole<br />
in the Yoke(Part 11) and through the hole in the bottom of the Front Axle Support(Part<br />
4. Fest den andre siden av gaffelen til stiften på<br />
9). From the bottom, insert Washer(Part 22) and secure with Lock Nut(Part 23).<br />
undersiden av forakselstøtten med den store gaf-<br />
Tighten clockwise until secure.<br />
felskiven (15). Lås med saksesplinten (24). OBS!<br />
3. Secure the Yoke (Part 11) to the Bruk Steering en skrutrekker Link Connector(Part med rettspor 12) by for threading å bøye ut one<br />
M8 x 19 15 Bolt(Part 21 19) through splintens the first hole klør in slik the Yoke(Part at det går 11) an then å få en into av the dem Link inn<br />
Connector(Part 12). Secure With i stiftens Washer(Part hull. 22) and Lock Nut(Part 23).<br />
Tighten clockwise until secure. 5. Sett hjulene (5) på forakselstøttens (6) gjengede<br />
stang.<br />
4. Attach the top of the Yoke(Part 6. Fest 11) to hvert the appendage hjul med en located fjærskive on the (17) under og en side(top) stor of<br />
15 23<br />
the Front Axle Support(Part 9) låsemutter by first inserting (18). Large Stram Yoke låsemutteren Washer(Part med 15) klokka and then<br />
inserting Cotter Pin(Part 24) into til hjulet the hole sitter in the fast. middle of the appendage.<br />
1. Fest styrearmen (12) til forakselstøtten NOTE: (9) Use med a flat to Head Screwdriver to separate<br />
4.CONTINUED..and bend the the end end of of the the Cotter Pin Pin outwards to to lock it it into into place.<br />
M8 x 15 styrebolter (19). Lås med skive (22) og<br />
låsemutter (23). Trekk til med klokka.<br />
3<br />
© 2009 <strong>Biltema</strong> Nordic Services AB<br />
22<br />
23<br />
18<br />
19<br />
17<br />
18<br />
18<br />
2. Join the Yoke(Part 11)<br />
and the Center Front<br />
Axle Brace(Part 10) to<br />
the Front Axle<br />
Support(Part 9) by<br />
first threading one M8<br />
x 25 Bolt(Part 21)<br />
through the hole in the<br />
Center Front Axle<br />
22<br />
23<br />
1. Attach the Steering 17 17 Link<br />
Connector(Part 12) to the<br />
Front Axle Support(Part 9) by<br />
threading two M8 x 15 Bolts<br />
(Part 19) through the top of the<br />
Link connector (Part 12) and<br />
into the Axle Support(Part 9).<br />
Secure at the bottom with<br />
Washer(Part 22) and then<br />
Lock Nut(Part 23). Tighten<br />
clockwise until secure.<br />
10<br />
18 18<br />
21<br />
19<br />
1. Attach the Steering Link<br />
Connector(Part 12) to the<br />
Front Axle Support(Part Art. 14-087 9) by<br />
threading two M8 x 15 Bolts<br />
(Part 19) through the top of the<br />
2. Fest gaffelen (11) Link og forakselstaget connector (Part (10) 12) til and forakselstøtten<br />
(9) med into en the M8 Axle x 25 Support(Part styrebolt (21). 9). Lås<br />
med skive (22) og Secure låsemutter at the (23). bottom Trekk with til med<br />
klokka. Washer(Part 22) and then<br />
3. Fest gaffelen (11) Lock til styrearmen Nut(Part 23). (12) Tighten med en M8<br />
x 15 styrebolt. Lås clockwise med skive until (22) secure. og låsemutter<br />
(23). Trekk til med klokka.<br />
19<br />
4<br />
5. 5. Slide Wheels(Part 5) 5) onto the extended<br />
threaded ends of of the Front Axle Support<br />
(Part 9). 9).<br />
6. 6. Secure Wheels first with<br />
Wheel Spring Washer(Part 17), and large lock Nut<br />
(Part 18). Tighten Large Lock Nut clockwise until <strong>wheel</strong>s are secure.<br />
BED ASSEMBLY:<br />
21<br />
22<br />
24 24<br />
22<br />
15 15<br />
17 17<br />
18 18
Change language