wheel assembly - Biltema

FI
FRAME ASSEMBLY:
FRAME ASSEMBLY:
Kehys
2 Sivulaidat
Parts needed:
3 Etulaita
4 Perälaita
#2 Side Panel
Parts needed:
16 Sokka
#3 Front Panel
25 Lukkosanka (kiinnitetty #2 valmiiksi) #4 Side Back Panel
#3 #16 Front Panel Panel Assembly Pins
#4 #25 Back Lock Panel Handles
#16 Panel -attached Assembly to Pins
#25 Lock Front Handles and Back
-attached Panels to
Bed Front Assembly and Back
Panels
Bed Assembly
8
Art. 14-087
1. Join the Back Panel
25
valmiiksi koottu pohjaosa
(Part 4) to the Bed
1. Kiinnitä perälaita ja sivulaidat 1. Join (Part pohjaosaan the 1) Back by inserting Panel sokkien (16) 25
avulla.
(Part two 4) Panel to the Assembly Bed Pins
2. Kiinnitä perälaita sivulaitoihin (Part (Part vetämällä 1) 16) by inserting through lukitushelat the
koukkujen yli.
two side Panel loop Assembly located atPins
16
3. Kiinnitä etulaita pohjaosaan (Part the sokkien bottom 16) through avulla. of the the Back
25
4. Kiinnitä etulaita sivulaitoihin side Panel vetämällä loop and located lukitushelat the lop at
16
koukkujen yli.
the edge bottom of the of Bed. the Back
25
Panel and the lop
3. Lift Lock 2. edge Join Handles(Part the of the side Bed. 25) that have been pre-attached to the Front and Back
Panels Panels(Part up and to secure 2) the Back(Part 4) and the Side Panels(Part 2) together
2. Join to by the firmly the Bed side pressing (Part 1) the Lock Handle down
and around Panels(Part by inserting the hook 2) on the end of the
Side Panel. to four the more Bed (Part Panel 1)
by Assembly inserting Pins(Part 16)
four two more per Side Panel Panel-into the loops at the bottom of the Side Panels and the
4. Repeat Assembly top the edge process Pins(Part of the with Bed. the 16)
25
Front two Panel(Part per Side 3), Panel-into the loops at the bottom of the Side Panels and the
Panel top Assembly edge of Pins the Bed.
(Part 16)
and the two
remaining Lock
Handles
(Part 25).
8
25
25
19 © 2009 Biltema Nordic Services AB
25