wheel assembly - Biltema

SE
FRAME ASSEMBLY:
FRAME ASSEMBLY:
ram
2 Sidläm
Parts needed:
3 Framläm
4 Bakläm
#2 Side Panel
Parts needed:
16 Sprint
#3 Front Panel
25 Låsbygel (förmonterad) #2 #4 Side Back Panel
#3 #16 Front Panel Panel Assembly Pins
#4 #25 Back Lock Panel Handles
#16 Panel -attached Assembly to Pins
#25 Lock Front Handles and Back
-attached Panels to
Bed Front Assembly and Back
Panels
Bed Assembly
8
Art. 14-087
1. Join the Back Panel
Färdigmonterad flakbotten.
(Part 4) to the Bed
1. Fäst baklämmen och sidolämmarna 1. Join (Part the 1) Back by vid inserting flakbotten Panel med
hjälp av sprintarna (16). (Part two 4) Panel to the Assembly Bed Pins
2. Fäst baklämmen vid sidolämmarna (Part (Part 1) 16) by genom inserting through att the dra lås-
25
25
byglarna över krokarna. two side Panel loop Assembly located atPins
3. Fäst framlämmen vid flakbotten (Part the bottom med 16) through hjälp of the av the sprin- Back
16
25
tarna.
side Panel loop and located the lop at
16
4. Fäst framlämmen vid sidolämmarna the edge bottom of the genom of Bed. the att Back dra
låsbyglarna över krokarna. Panel and the lop
3. Lift Lock 2. edge Join Handles(Part the of the side Bed. 25) that have been pre-attached to the Front and Back
Panels Panels(Part up and to secure 2) the Back(Part 4) and the Side Panels(Part 2) together
2. Join to by the firmly the Bed side pressing (Part 1) the Lock Handle down
and around Panels(Part by inserting the hook 2) on the end of the
Side Panel. to four the more Bed (Part Panel 1)
by Assembly inserting Pins(Part 16)
four two more per Side Panel Panel-into the loops at the bottom of the Side Panels and the
25
4. Repeat Assembly top the edge process Pins(Part of the with Bed. the 16)
25
Front two Panel(Part per Side 3), Panel-into the loops at the bottom of the Side Panels and the
Panel top Assembly edge of Pins the Bed.
(Part 16)
and the two
remaining Lock
Handles
(Part 25).
8
25
25
7 © 2009 Biltema Nordic Services AB
25