wheel assembly - Biltema

SE
(Part 18). Tighten Large Lock Nut clockwise until wheels are secure.
BED ASSEMBLY:
Flakbotten
1 Flakbotten
Parts 13 Handtagskoppling
needed:
14 Handtag
#1
19
Bed
M8 x 15 styrbult
#13 20 Handle M8 x 60 Coupler bult
#14 22 Pull Bricka Handle
#19 23 M8 Låsmutter x 15 Steering Bolts
#20 Färdigmonterade M8 x 60 Pull Handle framhjul Bolt
Färdigmonterade bakhjul
#22 Washers
#23 Lock Nuts
Front Wheel Assembly Back Wheel Assembly
23
23
19
19
22
22
5
Art. 14-087
1. With the Bed(Part 1) turned upside down, attach the Back wheel assembly
1. Placera 1. flakbotten With upp-och-ner.
to the the Bed Bed(Part by inserting 1) turned six upside M8 x 15 down, Steering attach Bolts(Part the Back 19) wheel from assembly
Fästa bakhjulen: to Passa in 2 st. M8 x 15 styrbultar (19) underifrån genom ett bottenstag och bakaxelstödet.
under the Bed the by bar inserting first through six M8 the x 15 holes Steering located Bolts(Part on the metal 19) from support bars on
Passa in under 4 st. M8 x 15 styrbultar (19) underifrån genom bottenstag och vänster respektive höger bakaxelstag.
Lås med bricka
the under the bar
(22) och
side first
låsmutter
of through the Bed the
(23).
then holes
Dra
into located the on the metal support bars on
the åt medsols.
holes under located side of on the both Bed the then Left into and the
23
holes Right located Rear Axle on both Brace( the Parts Left and
23
7
Right and Rear 8) and Axle also Brace( the Rear Parts Axle 7 Support
and (Part 8) and 6). Next also insert the Rear Washers Axle Support
22
(Part (Parts 6). 22) Next onto insert the Washers Bolts then
22
(Parts secure 22) with onto Lock the Bolts Nuts(Parts then 23).
secure Tighten with Lock Lock Nuts Nuts(Parts clockwise 23). until secure.
22
Tighten Lock Nuts clockwise until secure.
2223
23
19
19
20
20
19
19
14
14
5 © 2009 Biltema Nordic Services AB