ES7000 Model 7600R G2 Installation and User's Guide

The ES7000 Model 7600R G2 Server
The server can be turned off in any of the following ways:
2
1
• You can turn off the server from the operating system, if your operating system
supports this feature. After an orderly shutdown of the operating system, the server
will be turned off automatically.
• You can press the power-control button to start an orderly shutdown of the operating
system and turn off the server, if your operating system supports this feature.
• If the operating system stops functioning, you can press and hold the power-control
button for more than 4 seconds to turn off the server.
• If the Wake on LAN feature turned on the server, the Wake on LAN feature can turn off
the server.
• The IMM can turn off the server as an automatic response to a critical system failure.
• You can turn off the server through a request from the IMM.
Memory Expansion Module
If you purchased an optional Memory Expansion Module, it supports up to 32 DDR3
DIMMs, two 675-watt power supplies, and five 40 mm hot-swap speed-controlled fans. It
provides added memory and multi-node scaling support for host servers. The Memory
Expansion Module is designed for performance, expandability, and scalability; the fans and
power supplies use hot-swap technology for easy replacement without requiring that the
expansion module be turned off.
If you are adding an optional Memory Expansion Module or scaling to another server, see
the rack installation instructions that comes with the cable option kit.
The following illustration shows the Memory Expansion Module. The illustrations in this
document might differ slightly from your hardware.
2–20 3850 7273–001