Create OMR Job - Pitney Bowes Canada

Introduction
3 Insert Feeder
Use this feeder to add additional inserts to your
envelope. Material fed from this feeder cannot be folded
by the inserter. However, this feeder is especially suited
to feeding pre-folded or thicker inserts.
4 Fold Plate 2
5 Fold Plate 1
These units are used to create the desired fold in
material fed from the sheet feeder(s). The fold plates are
automatically set from the control panel.
6 Display/Control Panel
This is where you enter commands and where the
machine informs you of its status with the use of symbols
and icons. Full details of each button function are given
on the following page.
7 Stacker and Measuring Scale
Located at the right end, is the fold-down stacker. This
unit can be latched against the right side of the machine
when not in use to save space.
A scale is located along the front edge of the stacker to
aid measurement of material and envelopes.
8 Hand Crank
The hand crank is located behind a drop down cover at
the left front. It can be used to manually turn the machine
mechanisms to free a material stoppage.
9 Envelope Feeder
This feeder feeds envelopes into the inserting area
where they are filled with the sheets requested from the
other feeders.
10 Envelope Inverter Unit
This unit exits the envelope into the stacker face up.11
1-4