Owner's Manual - Infiniti Owner Portal - Infiniti USA

JVH0176M
Switch Beeps settings (models
without navigation system)
The “Switch Beeps” screen will appear
when pushing the SETTING button, selecting
the “Switch Beeps” key with the
INFINITI controller and pushing the ENTER
button.
Switch Beeps:
When this item is turned to ON, you will
hear a beep sound when you use a button.
ECO DRIVE settings (if so equipped)
To adjust the Eco pedal driver’s assist,
select the “Standard”, “Soft“ or “OFF” key
and adjust it with the INFINITI controller.
For the details of “ECO DRIVE”, see “ECO
pedal system” in the “5. Starting and
driving” section.
DRIVER ASSISTANCE settings (if so
equipped)
For the details of the “Driver Assistance”
settings, see the following items:
. “Lane Departure Warning (LDW) system/Lane
Departure Prevention (LDP)
system” in the “5. Starting and driving”
section.
. “Blind Spot Warning (BSW) system/
Blind Spot Intervention TM (BSI) system”
in the “5. Starting and driving” section.
. “Distance Control Assist (DCA) system”
in the “5. Starting and driving” section.
. “Forward Collision Warning (FCW) system”
in the “5. Starting and driving”
section.
SAA3008
Others settings (models with navigation
system)
The Others settings display will appear
when pushing the SETTING button and
selecting the “Others” key.
The following items are available:
. Comfort
. Language & Units
. Voice Recognition
. Infiniti Connection
. Camera
. Sonar
Monitor, climate, audio, phone and voice recognition systems 4-19