04.08.2013 Views

Owner's Manual - Infiniti Owner Portal - Infiniti USA

Owner's Manual - Infiniti Owner Portal - Infiniti USA

Owner's Manual - Infiniti Owner Portal - Infiniti USA

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

If any malfunction occurs in the Intelligent<br />

AWD system while the engine is running,<br />

the warning light will come on.<br />

The warning light may blink rapidly (about<br />

twice per second) while trying to free a<br />

stuck vehicle due to high power train oil<br />

temperature. The driving mode may change<br />

to two-wheel drive. If the warning light<br />

blinks rapidly during operation, stop the<br />

vehicle with the engine idling in a safe<br />

place immediately. Then if the light goes<br />

off after a while, you can continue driving.<br />

A large difference between the diameters<br />

of front and rear wheels will make the<br />

warning light blink slowly (about once per<br />

two seconds). Pull off the road in a safe<br />

area, and idle the engine. Check that all<br />

tire sizes are the same, tire pressure is<br />

correct and tires are not worn.<br />

If the warning light is blinking after the<br />

above operation, have your vehicle<br />

checked by an INFINITI retailer as soon as<br />

possible.<br />

WARNING<br />

. For AWD equipped vehicles, do not<br />

attempt to raise two wheels off the<br />

ground and shift the transmission to<br />

any drive or reverse position with the<br />

engine running. Doing so may result in<br />

drivetrain damage or unexpected vehicle<br />

movement which could result in serious<br />

vehicle damage or personal injury.<br />

. Do not attempt to test an AWD equipped<br />

vehicle on a 2-wheel dynamometer (such<br />

as the dynamometers used by some<br />

states for emissions testing) or similar<br />

equipment even if the other two wheels<br />

are raised off the ground. Make sure that<br />

you inform the test facility personnel<br />

that your vehicle is equipped with AWD<br />

before it is placed on a dynamometer.<br />

Using the wrong test equipment may<br />

result in drivetrain damage or unexpected<br />

vehicle movement which could<br />

result in serious vehicle damage or<br />

personal injury.<br />

CAUTION<br />

. Do not operate the engine on a free<br />

roller when any of the wheels are raised.<br />

. If the warning light comes on while<br />

driving there may be a malfunction in<br />

the AWD system. Reduce the vehicle<br />

speed and have your vehicle checked by<br />

an INFINITI retailer as soon as possible.<br />

. If the warning light remains on after the<br />

above operation, have your vehicle<br />

checked by an INFINITI retailer as soon<br />

as possible.<br />

. The power train may be damaged if you<br />

continue driving with the warning light<br />

blinking.<br />

Starting and driving 5-91

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!